Linux: >> Linux Kernel >> 3.10.23 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
team: Move team device type change at the end of team_port_add
Attempting to add a port device that is already up will expectedly fail,
but not before modifying the team device header_ops.
In the case of the syzbot reproducer the gre0 device is
already in state UP when it attempts to add it as a
port device of team0, this fails but before that
header_ops->create of team0 is changed from eth_header to ipgre_header
in the call to team_dev_type_check_change.
Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense
as the private data of the device still holds a struct team.
Example sequence of iproute2 commands to reproduce the hang/BUG():
ip link add dev team0 type team
ip link add dev gre0 type gre
ip link set dev gre0 up
ip link set dev gre0 master team0
ip link set dev team0 up
ping -I team0 1.1.1.1
Move team_dev_type_check_change down where all other checks have passed
as it changes the dev type with no way to restore it in case
one of the checks that follow it fail.
Also make sure to preserve the origial mtu assignment:
- If port_dev is not the same type as dev, dev takes mtu from port_dev
- If port_dev is the same type as dev, port_dev takes mtu from dev
This is done by adding a conditional before the call to dev_set_mtu
to prevent it from assigning port_dev->mtu = dev->mtu and instead
letting team_dev_type_check_change assign dev->mtu = port_dev->mtu.
The conditional is needed because the patch moves the call to
team_dev_type_check_change past dev_set_mtu.
Testing:
- team device driver in-tree selftests
- Add/remove various devices as slaves of team device
- syzbot
CVSS Score
5.5
EPSS Score
0.0
Published
2025-12-23
In the Linux kernel, the following vulnerability has been resolved:
ksm: use range-walk function to jump over holes in scan_get_next_rmap_item
Currently, scan_get_next_rmap_item() walks every page address in a VMA to
locate mergeable pages. This becomes highly inefficient when scanning
large virtual memory areas that contain mostly unmapped regions, causing
ksmd to use large amount of cpu without deduplicating much pages.
This patch replaces the per-address lookup with a range walk using
walk_page_range(). The range walker allows KSM to skip over entire
unmapped holes in a VMA, avoiding unnecessary lookups. This problem was
previously discussed in [1].
Consider the following test program which creates a 32 TiB mapping in the
virtual address space but only populates a single page:
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>
/* 32 TiB */
const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;
int main() {
char *area = mmap(NULL, size, PROT_READ | PROT_WRITE,
MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0);
if (area == MAP_FAILED) {
perror("mmap() failed\n");
return -1;
}
/* Populate a single page such that we get an anon_vma. */
*area = 0;
/* Enable KSM. */
madvise(area, size, MADV_MERGEABLE);
pause();
return 0;
}
$ ./ksm-sparse &
$ echo 1 > /sys/kernel/mm/ksm/run
Without this patch ksmd uses 100% of the cpu for a long time (more then 1
hour in my test machine) scanning all the 32 TiB virtual address space
that contain only one mapped page. This makes ksmd essentially deadlocked
not able to deduplicate anything of value. With this patch ksmd walks
only the one mapped page and skips the rest of the 32 TiB virtual address
space, making the scan fast using little cpu.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-12-16
In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
CVSS Score
3.3
EPSS Score
0.0
Published
2025-10-13
In the Linux kernel, the following vulnerability has been resolved:
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk
in the TCP_ESTABLISHED state. [0]
syzbot reused the server-side TCP Fast Open socket as a new client before
the TFO socket completes 3WHS:
1. accept()
2. connect(AF_UNSPEC)
3. connect() to another destination
As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes
it to TCP_CLOSE and makes connect() possible, which restarts timers.
Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the
retransmit timer triggered the warning and the intended packet was not
retransmitted.
Let's call reqsk_fastopen_remove() in tcp_disconnect().
[0]:
WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Modules linked in:
CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e
RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293
RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017
RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400
RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8
R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540
R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0
FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0
Call Trace:
<IRQ>
tcp_write_timer (net/ipv4/tcp_timer.c:738)
call_timer_fn (kernel/time/timer.c:1747)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372)
timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135)
tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035)
__walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1))
tmigr_handle_remote (kernel/time/timer_migration.c:1096)
handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580)
irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35))
</IRQ>
CVSS Score
7.8
EPSS Score
0.0
Published
2025-10-09
In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
When the best clk is searched, we iterate over all possible clk.
If we find a better match, the previous one, if any, needs to be freed.
If a better match has already been found, we still need to free the new
one, otherwise it leaks.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved:
bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent
In some specific situations, the return value of __bch_btree_node_alloc
may be NULL. This may lead to a potential NULL pointer dereference in
caller function like a calling chain :
btree_split->bch_btree_node_alloc->__bch_btree_node_alloc.
Fix it by initializing the return value in __bch_btree_node_alloc.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved:
tun: Fix memory leak for detached NAPI queue.
syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:
struct ifreq ifr = {}
int fd_tun, fd_tmp;
char buf[4] = {};
fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
ioctl(fd_tun, TUNSETIFF, &ifr);
ifr.ifr_flags = IFF_DETACH_QUEUE;
ioctl(fd_tun, TUNSETQUEUE, &ifr);
fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
ifr.ifr_flags = IFF_UP;
ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);
write(fd_tun, buf, sizeof(buf));
close(fd_tun);
If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached. We should prevent
it by checking tfile->detached before queuing skb.
Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would
be a small race window:
write() ioctl(IFF_DETACH_QUEUE)
`- tun_get_user `- __tun_detach
|- if (tfile->detached) |- tun_disable_queue
| `-> false | `- tfile->detached = tun
| `- tun_queue_purge
|- spin_lock_bh(&queue->lock)
`- __skb_queue_tail(queue, skb)
Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems. Also, we do the same kind of test for IFF_NAPI_FRAGS.
[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
[<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
[<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
[<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
[<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
[<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
[<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
[<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
[<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
[<000000008eb24774>] do_open fs/namei.c:3636 [inline]
[<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
[<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
[<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
[<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
[<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
[<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
[<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
[<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff88802f671700 (size 240):
comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
hex dump (first 32 bytes):
68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h.......
00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............
backtrace:
[<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
[<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
[<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
[<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
[<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
[<
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved:
btrfs: output extra debug info if we failed to find an inline backref
[BUG]
Syzbot reported several warning triggered inside
lookup_inline_extent_backref().
[CAUSE]
As usual, the reproducer doesn't reliably trigger locally here, but at
least we know the WARN_ON() is triggered when an inline backref can not
be found, and it can only be triggered when @insert is true. (I.e.
inserting a new inline backref, which means the backref should already
exist)
[ENHANCEMENT]
After the WARN_ON(), dump all the parameters and the extent tree
leaf to help debug.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved:
scsi: ses: Fix possible desc_ptr out-of-bounds accesses
Sanitize possible desc_ptr out-of-bounds accesses in
ses_enclosure_data_process().
CVSS Score
7.1
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
The function lio_target_nacl_info_show() uses sprintf() in a loop to print
details for every iSCSI connection in a session without checking for the
buffer length. With enough iSCSI connections it's possible to overflow the
buffer provided by configfs and corrupt the memory.
This patch replaces sprintf() with sysfs_emit_at() that checks for buffer
boundries.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-10-07