On NXP MIFARE Ultralight and NTAG cards, an attacker can interrupt a write operation (aka conduct a "tear off" attack) over RFID to bypass a Monotonic Counter protection mechanism. The impact depends on how the anti tear-off feature is used in specific applications such as public transportation, physical access control, etc.
An electromagnetic-wave side-channel issue was discovered on NXP SmartMX / P5x security microcontrollers and A7x secure authentication microcontrollers, with CryptoLib through v2.9. It allows attackers to extract the ECDSA private key after extensive physical access (and consequently produce a clone). This was demonstrated on the Google Titan Security Key, based on an NXP A7005a chip. Other FIDO U2F security keys are also impacted (Yubico YubiKey Neo and Feitian K9, K13, K21, and K40) as well as several NXP JavaCard smartcards (J3A081, J2A081, J3A041, J3D145_M59, J2D145_M59, J3D120_M60, J3D082_M60, J2D120_M60, J2D082_M60, J3D081_M59, J2D081_M59, J3D081_M61, J2D081_M61, J3D081_M59_DF, J3D081_M61_DF, J3E081_M64, J3E081_M66, J2E081_M64, J3E041_M66, J3E016_M66, J3E016_M64, J3E041_M64, J3E145_M64, J3E120_M65, J3E082_M65, J2E145_M64, J2E120_M65, J2E082_M65, J3E081_M64_DF, J3E081_M66_DF, J3E041_M66_DF, J3E016_M66_DF, J3E041_M64_DF, and J3E016_M64_DF).
The Bluetooth Low Energy implementation on NXP SDK through 2.2.1 for KW41Z devices does not properly restrict the Link Layer payload length, allowing attackers in radio range to cause a buffer overflow via a crafted packet.
The Bluetooth Low Energy (BLE) stack implementation on the NXP KW41Z (based on the MCUXpresso SDK with Bluetooth Low Energy Driver 2.2.1 and earlier) does not properly restrict the BLE Link Layer header and executes certain memory contents upon receiving a packet with a Link Layer ID (LLID) equal to zero. This allows attackers within radio range to cause deadlocks, cause anomalous behavior in the BLE state machine, or trigger a buffer overflow via a crafted BLE Link Layer frame.
On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by leveraging a load instruction inside the execute-only region to expose the protected code into a CPU register.
On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by observing CPU registers and the effect of code/instruction execution.
An improper certificate validation issue was discovered in NXP i.MX 28 i.MX 50, i.MX 53, i.MX 7Solo i.MX 7Dual Vybrid VF3xx, Vybrid VF5xx, Vybrid VF6xx, i.MX 6ULL, i.MX 6UltraLite, i.MX 6SoloLite, i.MX 6Solo, i.MX 6DualLite, i.MX 6SoloX, i.MX 6Dual, i.MX 6Quad, i.MX 6DualPlus, and i.MX 6QuadPlus. When the device is configured in security enabled configuration, under certain conditions it is possible to bypass the signature verification by using a specially crafted certificate leading to the execution of an unsigned image.
A stack-based buffer overflow issue was discovered in NXP i.MX 50, i.MX 53, i.MX 6ULL, i.MX 6UltraLite, i.MX 6SoloLite, i.MX 6Solo, i.MX 6DualLite, i.MX 6SoloX, i.MX 6Dual, i.MX 6Quad, i.MX 6DualPlus, i.MX 6QuadPlus, Vybrid VF3xx, Vybrid VF5xx, and Vybrid VF6xx. When the device is configured in security enabled configuration, SDP could be used to download a small section of code to an unprotected region of memory.