Juniper: >> Srx5400 Security Vulnerabilities
CVE-2023-36851
A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.
With a specific request to
webauth_operation.php
that doesn't require authentication, an attacker is able to upload and download arbitrary files via J-Web, leading to a loss of
integrity or confidentiality, which may allow chaining to other vulnerabilities.
This issue affects Juniper Networks Junos OS on SRX Series:
*
21.2 versions prior to 21.2R3-S8;
* 21.4
versions prior to
21.4R3-S6;
* 22.1
versions prior to
22.1R3-S5;
* 22.2
versions prior to
22.2R3-S3;
* 22.3
versions prior to
22.3R3-S2;
* 22.4 versions prior to 22,4R2-S2, 22.4R3;
* 23.2 versions prior to
23.2R1-S2, 23.2R2.
Known exploited
CVSS Score
5.3
EPSS Score
0.114
Published
2023-09-27
CVE-2023-36845
A PHP External Variable Modification vulnerability in J-Web of Juniper Networks Junos OS on EX Series
and SRX Series
allows an unauthenticated, network-based attacker to remotely execute code.
Using a crafted request which sets the variable PHPRC an attacker is able to modify the PHP execution environment allowing the injection und execution of code.
This issue affects Juniper Networks Junos OS on EX Series
and
SRX Series:
* All versions prior to
20.4R3-S9;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S7;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S5;
* 22.1 versions
prior to
22.1R3-S4;
* 22.2 versions
prior to
22.2R3-S2;
* 22.3 versions
prior to
22.3R2-S2, 22.3R3-S1;
* 22.4 versions
prior to
22.4R2-S1, 22.4R3;
* 23.2 versions prior to 23.2R1-S1, 23.2R2.
Known exploited
CVSS Score
9.8
EPSS Score
0.944
Published
2023-08-17
CVE-2023-36846
A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.
With a specific request to user.php that doesn't require authentication an attacker is able to upload arbitrary files via J-Web, leading to a loss of
integrity
for a certain
part of the file system, which may allow chaining to other vulnerabilities.
This issue affects Juniper Networks Junos OS on SRX Series:
* All versions prior to 20.4R3-S8;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions
prior to
21.3R3-S5;
* 21.4 versions
prior to
21.4R3-S5;
* 22.1 versions
prior to
22.1R3-S3;
* 22.2 versions
prior to
22.2R3-S2;
* 22.3 versions
prior to
22.3R2-S2, 22.3R3;
* 22.4 versions
prior to
22.4R2-S1, 22.4R3.
Known exploited
CVSS Score
5.3
EPSS Score
0.943
Published
2023-08-17
An Incomplete Internal State Distinction vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series allows an adjacent attacker to cause a Denial of Service (DoS).
If an SRX is configured in L2 transparent mode the receipt of a specific genuine packet can cause a single Packet Processing Engines (PPE) component of the PFE to run into a loop, which in turn will render the PPE unavailable. Each packet will cause one PPE to get into a loop, leading to a gradual performance degradation until all PPEs are unavailable and all traffic processing stops. To recover the affected FPC need to be restarted.
This issue affects Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series:
20.1 version 20.1R1 and later versions;
20.2 versions prior to 20.2R3-S7;
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S7;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S3;
21.3 versions prior to 21.3R3-S3;
21.4 versions prior to 21.4R3-S1;
22.1 versions prior to 22.1R3;
22.2 versions prior to 22.2R2;
22.3 versions prior to 22.3R1-S1, 22.3R2.
CVSS Score
6.5
EPSS Score
0.001
Published
2023-07-14
An Improper Validation of Syntactic Correctness of Input vulnerability in Intrusion Detection and Prevention (IDP) of Juniper Networks SRX Series and MX Series allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). Continued receipt of this specific packet will cause a sustained Denial of Service condition.
On all SRX Series and MX Series platforms, where IDP is enabled and a specific malformed SSL packet is received, the SSL detector crashes leading to an FPC core.
This issue affects Juniper Networks SRX Series and MX Series prior to SigPack 3598.
In order to identify the current SigPack version, following command can be used:
user@junos# show security idp security-package-version
CVSS Score
7.5
EPSS Score
0.001
Published
2023-07-14
An Out-of-bounds Read vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a local, authenticated attacker with low privileges, to cause a Denial of Service (DoS).
If a low privileged user executes a specific CLI command, flowd which is responsible for traffic forwarding in SRX crashes and generates a core dump. This will cause temporary traffic interruption until the flowd process is restarted automatically. Continued execution of this command will lead to a sustained DoS.
This issue affects Juniper Networks Junos OS on SRX Series:
All versions prior to 20.2R3-S7;
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S6;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S4;
21.3 versions prior to 21.3R3-S4;
21.4 versions prior to 21.4R3-S3;
22.1 versions prior to 22.1R3-S1;
22.2 versions prior to 22.2R3;
22.3 versions prior to 22.3R2;
22.4 versions prior to 22.4R1-S1, 22.4R2.
CVSS Score
5.5
EPSS Score
0.0
Published
2023-07-14
An Improper Check or Handling of Exceptional Conditions vulnerability in the UTM (Unified Threat Management) Web-Filtering feature of Juniper Networks Junos OS on SRX Series causes a jbuf memory leak to occur when accessing certain websites, eventually leading to a Denial of Service (DoS) condition. Service restoration is only possible by rebooting the system.
The jbuf memory leak only occurs in SSL Proxy and UTM Web-Filtering configurations. Other products, platforms, and configurations are not affected by this vulnerability.
This issue affects Juniper Networks Junos OS on SRX Series:
22.2 versions prior to 22.2R3;
22.3 versions prior to 22.3R2-S1, 22.3R3;
22.4 versions prior to 22.4R1-S2, 22.4R2.
This issue does not affect Juniper Networks Junos OS versions prior to 22.2R2.
CVSS Score
7.5
EPSS Score
0.002
Published
2023-07-14
An Improperly Controlled Sequential Memory Allocation vulnerability in the Juniper Networks Deep Packet Inspection-Decoder (JDPI-Decoder) Application Signature component of Junos OS's AppID service on SRX Series devices will stop the JDPI-Decoder from identifying dynamic application traffic, allowing an unauthenticated network-based attacker to send traffic to the target device using the JDPI-Decoder, designed to inspect dynamic application traffic and take action upon this traffic, to instead begin to not take action and to pass the traffic through. An example session can be seen by running the following command and evaluating the output. user@device# run show security flow session source-prefix <address/mask> extensive Session ID: <session ID>, Status: Normal, State: Active Policy name: <name of policy> Dynamic application: junos:UNKNOWN, <<<<< LOOK HERE Please note, the JDPI-Decoder and the AppID SigPack are both affected and both must be upgraded along with the operating system to address the matter. By default, none of this is auto-enabled for automatic updates. This issue affects: Juniper Networks any version of the JDPI-Decoder Engine prior to version 5.7.0-47 with the JDPI-Decoder enabled using any version of the AppID SigPack prior to version 1.550.2-31 (SigPack 3533) on Junos OS on SRX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2;
CVSS Score
5.3
EPSS Score
0.003
Published
2023-04-17
An Improper Validation of Array Index vulnerability in the SIP ALG of Juniper Networks Junos OS on SRX 5000 Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). When an attacker sends an SIP packets with a malformed SDP field then the SIP ALG can not process it which will lead to an FPC crash and restart. Continued receipt of these specific packets will lead to a sustained Denial of Service. This issue can only occur when both below mentioned conditions are fulfilled: 1. Call distribution needs to be enabled: [security alg sip enable-call-distribution] 2. The SIP ALG needs to be enabled, either implicitly / by default or by way of configuration. To confirm whether SIP ALG is enabled on SRX, and MX with SPC3 use the following command: user@host> show security alg status | match sip SIP : Enabled This issue affects Juniper Networks Junos OS on SRX 5000 Series: 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R1-S1, 22.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1.
CVSS Score
7.5
EPSS Score
0.001
Published
2023-01-13
An Unchecked Input for Loop Condition vulnerability in a NAT library of Juniper Networks Junos OS allows a local authenticated attacker with low privileges to cause a Denial of Service (DoS). When an inconsistent "deterministic NAT" configuration is present on an SRX, or MX with SPC3 and then a specific CLI command is issued the SPC will crash and restart. Repeated execution of this command will lead to a sustained DoS. Such a configuration is characterized by the total number of port blocks being greater than the total number of hosts. An example for such configuration is: [ services nat source pool TEST-POOL address x.x.x.0/32 to x.x.x.15/32 ] [ services nat source pool TEST-POOL port deterministic block-size 1008 ] [ services nat source pool TEST-POOL port deterministic host address y.y.y.0/24] [ services nat source pool TEST-POOL port deterministic include-boundary-addresses] where according to the following calculation: 65536-1024=64512 (number of usable ports per IP address, implicit) 64512/1008=64 (number of port blocks per Nat IP) x.x.x.0/32 to x.x.x.15/32 = 16 (NAT IP addresses available in NAT pool) total port blocks in NAT Pool = 64 blocks per IP * 16 IPs = 1024 Port blocks host address y.y.y.0/24 = 256 hosts (with include-boundary-addresses) If the port block size is configured to be 4032, then the total port blocks are (64512/4032) * 16 = 256 which is equivalent to the total host addresses of 256, and the issue will not be seen. This issue affects Juniper Networks Junos OS on SRX Series, and MX Series with SPC3: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2.
CVSS Score
5.5
EPSS Score
0.0
Published
2023-01-13