An Improper Release of Memory Before Removing Last Reference vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a local, low privileged attacker to cause an FPC crash, leading to Denial of Service (DoS).
On all Junos MX Series with MPC1 - MPC9, LC480, LC2101, MX10003, and MX80, when Connectivity-Fault-Management (CFM) is enabled in a VPLS scenario, and a specific LDP related command is run, an FPC will crash and reboot. Continued execution of this specific LDP command can lead to sustained Denial of Service condition.
This issue affects:
Juniper Networks Junos OS on MX Series:
* All versions prior to 20.4R3-S7;
* 21.1 versions prior to 21.1R3-S5;
* 21.2 versions prior to 21.2R3-S4;
* 21.3 versions prior to 21.3R3-S4;
* 21.4 versions prior to 21.4R3-S3;
* 22.1 versions prior to 22.1R3-S1;
* 22.2 versions prior to 22.2R2-S1, 22.2R3;
* 22.3 versions prior to 22.3R1-S2, 22.3R2.
CVSS Score
5.5
EPSS Score
0.0
Published
2023-10-13
An Improper Check for Unusual or Exceptional Conditions vulnerability in the SIP ALG of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated network-based attacker to cause an integrity impact in connected networks.
If the SIP ALG is configured and a device receives a specifically malformed SIP packet, the device prevents this packet from being forwarded, but any subsequently received retransmissions of the same packet are forwarded as if they were valid.
This issue affects Juniper Networks Junos OS on SRX Series and MX Series:
* 20.4 versions prior to 20.4R3-S5;
* 21.1 versions prior to 21.1R3-S4;
* 21.2 versions prior to 21.2R3-S4;
* 21.3 versions prior to 21.3R3-S3;
* 21.4 versions prior to 21.4R3-S2;
* 22.1 versions prior to 22.1R2-S2, 22.1R3;
* 22.2 versions prior to 22.2R2-S1, 22.2R3;
* 22.3 versions prior to 22.3R1-S2, 22.3R2.
This issue doesn't not affected releases prior to 20.4R1.
CVSS Score
5.8
EPSS Score
0.001
Published
2023-10-13
An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS).
On Junos MX Series platforms with Precision Time Protocol (PTP) configured, a prolonged routing protocol churn can lead to an FPC crash and restart.
This issue affects Juniper Networks Junos OS on MX Series:
* All versions prior to 20.4R3-S4;
* 21.1 version 21.1R1 and later versions;
* 21.2 versions prior to 21.2R3-S2;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3;
* 22.1 versions prior to 22.1R3;
* 22.2 versions prior to 22.2R1-S1, 22.2R2.
CVSS Score
7.5
EPSS Score
0.001
Published
2023-10-13
An Improper Validation of Specified Index, Position, or Offset in Input vulnerability in the Connectivity Fault Management(CFM) module of Juniper Networks Junos OS on MX Series(except MPC10, MPC11 and LC9600) allows an adjacent attacker on the local broadcast domain to cause a Denial of Service(DoS).
Upon receiving a malformed CFM packet, the MPC crashes. Continued receipt of these packets causes a sustained denial of service. This issue can only be triggered when CFM hasn't been configured.
This issue affects:
Juniper Networks Junos OS
All versions prior to 19.1R3-S10 on MX Series;
19.2 versions prior to 19.2R3-S7 on MX Series;
19.3 versions prior to 19.3R3-S8 on MX Series;
19.4 versions prior to 19.4R3-S12 on MX Series;
20.1 version 20.1R1 and later versions on MX Series;
20.2 versions prior to 20.2R3-S7 on MX Series;
20.3 version 20.3R1 and later versions on MX Series;
20.4 versions prior to 20.4R3-S7 on MX Series;
21.1 versions prior to 21.1R3-S5 on MX Series;
21.2 versions prior to 21.2R3-S4 on MX Series;
21.3 versions prior to 21.3R3-S4 on MX Series;
21.4 versions prior to 21.4R3-S3 on MX Series;
22.1 versions prior to 22.1R3-S2 on MX Series;
22.2 versions prior to 22.2R3 on MX Series;
22.3 versions prior to 22.3R2, 22.3R3 on MX Series;
22.4 versions prior to 22.4R2 on MX Series.
CVSS Score
6.5
EPSS Score
0.001
Published
2023-07-14
An Improper Handling of Undefined Values vulnerability in the periodic packet management daemon (PPMD) of Juniper Networks Junos OS on MX Series(except MPC10, MPC11 and LC9600) allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS).
When a malformed CFM packet is received, it leads to an FPC crash. Continued receipt of these packets causes a sustained denial of service. This vulnerability occurs only when CFM has been configured on the interface.
This issue affects Juniper Networks Junos OS:
versions prior to 19.1R3-S10 on MX Series;
19.2 versions prior to 19.2R3-S7 on MX Series;
19.3 versions prior to 19.3R3-S8 on MX Series;
19.4 versions prior to 19.4R3-S12 on MX Series;
20.1 version 20.1R1 and later versions on MX Series;
20.2 versions prior to 20.2R3-S8 on MX Series;
20.3 version 20.3R1 and later versions on MX Series;
20.4 versions prior to 20.4R3-S7 on MX Series;
21.1 versions prior to 21.1R3-S5 on MX Series;
21.2 versions prior to 21.2R3-S5 on MX Series;
21.3 versions prior to 21.3R3-S4 on MX Series;
21.4 versions prior to 21.4R3-S4 on MX Series;
22.1 versions prior to 22.1R3-S3 on MX Series;
22.2 versions prior to 22.2R3-S1 on MX Series;
22.3 versions prior to 22.3R3 on MX Series;
22.4 versions prior to 22.4R1-S2, 22.4R2 on MX Series.
CVSS Score
6.5
EPSS Score
0.001
Published
2023-07-14
An Improper Validation of Syntactic Correctness of Input vulnerability in Intrusion Detection and Prevention (IDP) of Juniper Networks SRX Series and MX Series allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). Continued receipt of this specific packet will cause a sustained Denial of Service condition.
On all SRX Series and MX Series platforms, where IDP is enabled and a specific malformed SSL packet is received, the SSL detector crashes leading to an FPC core.
This issue affects Juniper Networks SRX Series and MX Series prior to SigPack 3598.
In order to identify the current SigPack version, following command can be used:
user@junos# show security idp security-package-version
CVSS Score
7.5
EPSS Score
0.001
Published
2023-07-14
An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS on MX Series allows an unauthenticated network-based attacker to send specific packets to an Aggregated Multiservices (AMS) interface on the device, causing the packet forwarding engine (PFE) to crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
This issue is only triggered by packets destined to a local-interface via a service-interface (AMS). AMS is only supported on the MS-MPC, MS-MIC, and MX-SPC3 cards. This issue is not experienced on other types of interfaces or configurations. Additionally, transit traffic does not trigger this issue.
This issue affects Juniper Networks Junos OS on MX Series:
All versions prior to 19.1R3-S10;
19.2 versions prior to 19.2R3-S7;
19.3 versions prior to 19.3R3-S8;
19.4 versions prior to 19.4R3-S12;
20.2 versions prior to 20.2R3-S8;
20.4 versions prior to 20.4R3-S7;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S5;
21.3 versions prior to 21.3R3-S4;
21.4 versions prior to 21.4R3-S3;
22.1 versions prior to 22.1R3-S2;
22.2 versions prior to 22.2R3;
22.3 versions prior to 22.3R2-S1, 22.3R3;
22.4 versions prior to 22.4R1-S2, 22.4R2.
CVSS Score
7.5
EPSS Score
0.002
Published
2023-07-14
An Improper Check for Unusual or Exceptional Conditions vulnerability in the bbe-smgd of Juniper Networks Junos OS allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). In a Broadband Edge / Subscriber Management scenario on MX Series when a specifically malformed ICMP packet addressed to the device is received from a subscriber the bbe-smgd will crash, affecting the subscriber sessions that are connecting, updating, or terminating. Continued receipt of such packets will lead to a sustained DoS condition. When this issue happens the below log can be seen if the traceoptions for the processes smg-service are enabled: BBE_TRACE(TRACE_LEVEL_INFO, "%s: Dropped unsupported ICMP PKT ... This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S7; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2; 22.3 versions prior to 22.3R1-S2, 22.3R2.
CVSS Score
7.4
EPSS Score
0.001
Published
2023-04-17
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If specific traffic is received on MX Series and its rate exceeds the respective DDoS protection limit the ingress PFE will crash and restart. Continued receipt of this traffic will create a sustained DoS condition. This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S5; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R2.
CVSS Score
7.5
EPSS Score
0.002
Published
2023-04-17
An Unchecked Input for Loop Condition vulnerability in a NAT library of Juniper Networks Junos OS allows a local authenticated attacker with low privileges to cause a Denial of Service (DoS). When an inconsistent "deterministic NAT" configuration is present on an SRX, or MX with SPC3 and then a specific CLI command is issued the SPC will crash and restart. Repeated execution of this command will lead to a sustained DoS. Such a configuration is characterized by the total number of port blocks being greater than the total number of hosts. An example for such configuration is: [ services nat source pool TEST-POOL address x.x.x.0/32 to x.x.x.15/32 ] [ services nat source pool TEST-POOL port deterministic block-size 1008 ] [ services nat source pool TEST-POOL port deterministic host address y.y.y.0/24] [ services nat source pool TEST-POOL port deterministic include-boundary-addresses] where according to the following calculation: 65536-1024=64512 (number of usable ports per IP address, implicit) 64512/1008=64 (number of port blocks per Nat IP) x.x.x.0/32 to x.x.x.15/32 = 16 (NAT IP addresses available in NAT pool) total port blocks in NAT Pool = 64 blocks per IP * 16 IPs = 1024 Port blocks host address y.y.y.0/24 = 256 hosts (with include-boundary-addresses) If the port block size is configured to be 4032, then the total port blocks are (64512/4032) * 16 = 256 which is equivalent to the total host addresses of 256, and the issue will not be seen. This issue affects Juniper Networks Junos OS on SRX Series, and MX Series with SPC3: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2.
CVSS Score
5.5
EPSS Score
0.0
Published
2023-01-13