In the Linux kernel, the following vulnerability has been resolved:
ice: fix Tx scheduler error handling in XDP callback
When the XDP program is loaded, the XDP callback adds new Tx queues.
This means that the callback must update the Tx scheduler with the new
queue number. In the event of a Tx scheduler failure, the XDP callback
should also fail and roll back any changes previously made for XDP
preparation.
The previous implementation had a bug that not all changes made by the
XDP callback were rolled back. This caused the crash with the following
call trace:
[ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5
[ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI
[ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary)
[ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022
[ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice]
[...]
[ +0.002715] Call Trace:
[ +0.002452] <IRQ>
[ +0.002021] ? __die_body.cold+0x19/0x29
[ +0.003922] ? die_addr+0x3c/0x60
[ +0.003319] ? exc_general_protection+0x17c/0x400
[ +0.004707] ? asm_exc_general_protection+0x26/0x30
[ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice]
[ +0.004835] ice_napi_poll+0x665/0x680 [ice]
[ +0.004320] __napi_poll+0x28/0x190
[ +0.003500] net_rx_action+0x198/0x360
[ +0.003752] ? update_rq_clock+0x39/0x220
[ +0.004013] handle_softirqs+0xf1/0x340
[ +0.003840] ? sched_clock_cpu+0xf/0x1f0
[ +0.003925] __irq_exit_rcu+0xc2/0xe0
[ +0.003665] common_interrupt+0x85/0xa0
[ +0.003839] </IRQ>
[ +0.002098] <TASK>
[ +0.002106] asm_common_interrupt+0x26/0x40
[ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690
Fix this by performing the missing unmapping of XDP queues from
q_vectors and setting the XDP rings pointer back to NULL after all those
queues are released.
Also, add an immediate exit from the XDP callback in case of ring
preparation failure.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken
A SCO connection without the proper voice_setting can cause
the controller to lock up.
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill timer properly at removal
The USB-audio MIDI code initializes the timer, but in a rare case, the
driver might be freed without the disconnect call. This leaves the
timer in an active state while the assigned object is released via
snd_usbmidi_free(), which ends up with a kernel warning when the debug
configuration is enabled, as spotted by fuzzer.
For avoiding the problem, put timer_shutdown_sync() at
snd_usbmidi_free(), so that the timer can be killed properly.
While we're at it, replace the existing timer_delete_sync() at the
disconnect callback with timer_shutdown_sync(), too.
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: don't warn when if there is a FW error
iwl_trans_reclaim is warning if it is called when the FW is not alive.
But if it is called when there is a pending restart, i.e. after a FW
error, there is no need to warn, instead - return silently.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Increase block_sequence array size
[Why]
It's possible to generate more than 50 steps in hwss_build_fast_sequence,
for example with a 6-pipe asic where all pipes are in one MPC chain. This
overflows the block_sequence buffer and corrupts block_sequence_steps,
causing a crash.
[How]
Expand block_sequence to 100 items. A naive upper bound on the possible
number of steps for a 6-pipe asic, ignoring the potential for steps to be
mutually exclusive, is 91 with current code, therefore 100 is sufficient.
In the Linux kernel, the following vulnerability has been resolved:
spi-rockchip: Fix register out of bounds access
Do not write native chip select stuff for GPIO chip selects.
GPIOs can be numbered much higher than native CS.
Also, it makes no sense.
In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops
Fix a kernel oops found while testing the stm32_pcie Endpoint driver
with handling of PERST# deassertion:
During EP initialization, pci_epf_test_alloc_space() allocates all BARs,
which are further freed if epc_set_bar() fails (for instance, due to no
free inbound window).
However, when pci_epc_set_bar() fails, the error path:
pci_epc_set_bar() ->
pci_epf_free_space()
does not clear the previous assignment to epf_test->reg[bar].
Then, if the host reboots, the PERST# deassertion restarts the BAR
allocation sequence with the same allocation failure (no free inbound
window), creating a double free situation since epf_test->reg[bar] was
deallocated and is still non-NULL.
Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space()
invocations are symmetric, and as such, set epf_test->reg[bar] to NULL
when memory is freed.
[kwilczynski: commit log]
In the Linux kernel, the following vulnerability has been resolved:
virtio: break and reset virtio devices on device_shutdown()
Hongyu reported a hang on kexec in a VM. QEMU reported invalid memory
accesses during the hang.
Invalid read at addr 0x102877002, size 2, region '(null)', reason: rejected
Invalid write at addr 0x102877A44, size 2, region '(null)', reason: rejected
...
It was traced down to virtio-console. Kexec works fine if virtio-console
is not in use.
The issue is that virtio-console continues to write to the MMIO even after
underlying virtio-pci device is reset.
Additionally, Eric noticed that IOMMUs are reset before devices, if
devices are not reset on shutdown they continue to poke at guest memory
and get errors from the IOMMU. Some devices get wedged then.
The problem can be solved by breaking all virtio devices on virtio
bus shutdown, then resetting them.