Linux: >> Linux Kernel >> 5.6.19 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: socinfo: Avoid out of bounds read of serial number
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
binfmt_flat: Fix integer overflow bug on 32 bit systems
Most of these sizes and counts are capped at 256MB so the math doesn't
result in an integer overflow. The "relocs" count needs to be checked
as well. Otherwise on 32bit systems the calculation of "full_data"
could be wrong.
full_data = data_len + relocs * sizeof(unsigned long);
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit()
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Patchwork: https://patchwork.freedesktop.org/patch/624696/
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: bsg: Set bsg_queue to NULL after removal
Currently, this does not cause any issues, but I believe it is necessary to
set bsg_queue to NULL after removing it to prevent potential use-after-free
(UAF) access.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1]
If dvb->mux is not initialized successfully by vidtv_mux_init() in the
vidtv_start_streaming(), it will trigger null pointer dereference about mux
in vidtv_mux_stop_thread().
Adjust the timing of streaming initialization and check it before
stopping it.
[1]
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471
Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8
RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125
RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128
RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188
R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710
FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline]
vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252
dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000
dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486
dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559
dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline]
dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246
__fput+0x3f8/0xb60 fs/file_table.c:450
task_work_run+0x14e/0x250 kernel/task_work.c:239
get_signal+0x1d3/0x2610 kernel/signal.c:2790
arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218
do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
padata: avoid UAF for reorder_work
Although the previous patch can avoid ps and ps UAF for _do_serial, it
can not avoid potential UAF issue for reorder_work. This issue can
happen just as below:
crypto_request crypto_request crypto_del_alg
padata_do_serial
...
padata_reorder
// processes all remaining
// requests then breaks
while (1) {
if (!padata)
break;
...
}
padata_do_serial
// new request added
list_add
// sees the new request
queue_work(reorder_work)
padata_reorder
queue_work_on(squeue->work)
...
<kworker context>
padata_serial_worker
// completes new request,
// no more outstanding
// requests
crypto_del_alg
// free pd
<kworker context>
invoke_padata_reorder
// UAF of pd
To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work'
into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
padata: fix UAF in padata_reorder
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/
CVSS Score
7.8
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
bpf: Send signals asynchronously if !preemptible
BPF programs can execute in all kinds of contexts and when a program
running in a non-preemptible context uses the bpf_send_signal() kfunc,
it will cause issues because this kfunc can sleep.
Change `irqs_disabled()` to `!preemptible()`.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
nbd: don't allow reconnect after disconnect
Following process can cause nbd_config UAF:
1) grab nbd_config temporarily;
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
3) nbd_genl_reconfigure() queue recv_work() again;
nbd_genl_reconfigure
config = nbd_get_config_unlocked(nbd)
if (!config)
-> succeed
if (!test_bit(NBD_RT_BOUND, ...))
-> succeed
nbd_reconnect_socket
queue_work(nbd->recv_workq, &args->work)
4) step 1) release the reference;
5) Finially, recv_work() will trigger UAF:
recv_work
nbd_config_put(nbd)
-> nbd_config is freed
atomic_dec(&config->recv_threads)
-> UAF
Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-02-27
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix implicit ODP use after free
Prevent double queueing of implicit ODP mr destroy work by using
__xa_cmpxchg() to make sure this is the only time we are destroying this
specific mr.
Without this change, we could try to invalidate this mr twice, which in
turn could result in queuing a MR work destroy twice, and eventually the
second work could execute after the MR was freed due to the first work,
causing a user after free and trace below.
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 12178 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x130
Modules linked in: bonding ib_ipoib vfio_pci ip_gre geneve nf_tables ip6_gre gre ip6_tunnel tunnel6 ipip tunnel4 ib_umad rdma_ucm mlx5_vfio_pci vfio_pci_core vfio_iommu_type1 mlx5_ib vfio ib_uverbs mlx5_core iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 2 PID: 12178 Comm: kworker/u20:5 Not tainted 6.5.0-rc1_net_next_mlx5_58c644e #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound free_implicit_child_mr_work [mlx5_ib]
RIP: 0010:refcount_warn_saturate+0x12b/0x130
Code: 48 c7 c7 38 95 2a 82 c6 05 bc c6 fe 00 01 e8 0c 66 aa ff 0f 0b 5b c3 48 c7 c7 e0 94 2a 82 c6 05 a7 c6 fe 00 01 e8 f5 65 aa ff <0f> 0b 5b c3 90 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 8d 50 ff
RSP: 0018:ffff8881008e3e40 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: ffff88852c91b5c8 RSI: 0000000000000001 RDI: ffff88852c91b5c0
RBP: ffff8881dacd4e00 R08: 00000000ffffffff R09: 0000000000000019
R10: 000000000000072e R11: 0000000063666572 R12: ffff88812bfd9e00
R13: ffff8881c792d200 R14: ffff88810011c005 R15: ffff8881002099c0
FS: 0000000000000000(0000) GS:ffff88852c900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5694b5e000 CR3: 00000001153f6003 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0x12b/0x130
free_implicit_child_mr_work+0x180/0x1b0 [mlx5_ib]
process_one_work+0x1cc/0x3c0
worker_thread+0x218/0x3c0
kthread+0xc6/0xf0
ret_from_fork+0x1f/0x30
</TASK>
CVSS Score
7.8
EPSS Score
0.0
Published
2025-02-27