In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix for possible memory corruption
Init Control Block is dereferenced incorrectly. Correctly dereference ICB
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: During vport delete send async logout explicitly
During vport delete, it is observed that during unload we hit a crash
because of stale entries in outstanding command array. For all these stale
I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but
I/Os could not complete while vport delete is in process of deleting.
BUG: kernel NULL pointer dereference, address: 000000000000001c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
Workqueue: qla2xxx_wq qla_do_work [qla2xxx]
RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0
RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001
RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0
RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8
R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0
Call Trace:
<TASK>
qla2xxx_qpair_sp_free_dma+0x417/0x4e0
? qla2xxx_qpair_sp_compl+0x10d/0x1a0
? qla2x00_status_entry+0x768/0x2830
? newidle_balance+0x2f0/0x430
? dequeue_entity+0x100/0x3c0
? qla24xx_process_response_queue+0x6a1/0x19e0
? __schedule+0x2d5/0x1140
? qla_do_work+0x47/0x60
? process_one_work+0x267/0x440
? process_one_work+0x440/0x440
? worker_thread+0x2d/0x3d0
? process_one_work+0x440/0x440
? kthread+0x156/0x180
? set_kthread_struct+0x50/0x50
? ret_from_fork+0x22/0x30
</TASK>
Send out async logout explicitly for all the ports during vport delete.
In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix use after free in iucv_sock_close()
iucv_sever_path() is called from process context and from bh context.
iucv->path is used as indicator whether somebody else is taking care of
severing the path (or it is already removed / never existed).
This needs to be done with atomic compare and swap, otherwise there is a
small window where iucv_sock_close() will try to work with a path that has
already been severed and freed by iucv_callback_connrej() called by
iucv_tasklet_fn().
Example:
[452744.123844] Call Trace:
[452744.123845] ([<0000001e87f03880>] 0x1e87f03880)
[452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138
[452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv]
[452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv]
[452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv]
[452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8
[452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48
[452744.124820] [<00000000d5421642>] __fput+0xba/0x268
[452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0
[452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90
[452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8
[452744.125319] Last Breaking-Event-Address:
[452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138
[452744.125324]
[452744.125325] Kernel panic - not syncing: Fatal exception in interrupt
Note that bh_lock_sock() is not serializing the tasklet context against
process context, because the check for sock_owned_by_user() and
corresponding handling is missing.
Ideas for a future clean-up patch:
A) Correct usage of bh_lock_sock() in tasklet context, as described in
Re-enqueue, if needed. This may require adding return values to the
tasklet functions and thus changes to all users of iucv.
B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.
In the Linux kernel, the following vulnerability has been resolved:
mISDN: Fix a use after free in hfcmulti_tx()
Don't dereference *sp after calling dev_kfree_skb(*sp).
In the Linux kernel, the following vulnerability has been resolved:
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
both callers have verified that fd is not greater than ->max_fds;
however, misprediction might end up with
tofree = fdt->fd[fd];
being speculatively executed. That's wrong for the same reasons
why it's wrong in close_fd()/file_close_fd_locked(); the same
solution applies - array_index_nospec(fd, fdt->max_fds) could differ
from fd only in case of speculative execution on mispredicted path.
In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock race
Ensure that `i2c_lock' is held when setting interrupt latch and mask in
pca953x_irq_bus_sync_unlock() in order to avoid races.
The other (non-probe) call site pca953x_gpio_set_multiple() ensures the
lock is held before calling pca953x_write_regs().
The problem occurred when a request raced against irq_bus_sync_unlock()
approximately once per thousand reboots on an i.MX8MP based system.
* Normal case
0-0022: write register AI|3a {03,02,00,00,01} Input latch P0
0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
0-0022: write register AI|08 {ff,00,00,00,00} Output P3
0-0022: write register AI|12 {fc,00,00,00,00} Config P3
* Race case
0-0022: write register AI|08 {ff,00,00,00,00} Output P3
0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register ***
0-0022: write register AI|12 {fc,00,00,00,00} Config P3
0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mos7840: fix crash on resume
Since commit c49cfa917025 ("USB: serial: use generic method if no
alternative is provided in usb serial layer"), USB serial core calls the
generic resume implementation when the driver has not provided one.
This can trigger a crash on resume with mos7840 since support for
multiple read URBs was added back in 2011. Specifically, both port read
URBs are now submitted on resume for open ports, but the context pointer
of the second URB is left set to the core rather than mos7840 port
structure.
Fix this by implementing dedicated suspend and resume functions for
mos7840.
Tested with Delock 87414 USB 2.0 to 4x serial adapter.
[ johan: analyse crash and rewrite commit message; set busy flag on
resume; drop bulk-in check; drop unnecessary usb_kill_urb() ]
In the Linux kernel, the following vulnerability has been resolved:
libceph: fix race between delayed_work() and ceph_monc_stop()
The way the delayed work is handled in ceph_monc_stop() is prone to
races with mon_fault() and possibly also finish_hunting(). Both of
these can requeue the delayed work which wouldn't be canceled by any of
the following code in case that happens after cancel_delayed_work_sync()
runs -- __close_session() doesn't mess with the delayed work in order
to avoid interfering with the hunting interval logic. This part was
missed in commit b5d91704f53e ("libceph: behave in mon_fault() if
cur_mon < 0") and use-after-free can still ensue on monc and objects
that hang off of it, with monc->auth and monc->monmap being
particularly susceptible to quickly being reused.
To fix this:
- clear monc->cur_mon and monc->hunting as part of closing the session
in ceph_monc_stop()
- bail from delayed_work() if monc->cur_mon is cleared, similar to how
it's done in mon_fault() and finish_hunting() (based on monc->hunting)
- call cancel_delayed_work_sync() after the session is closed
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
Userspace provided string 's' could trivially have the length zero. Left
unchecked this will firstly result in an OOB read in the form
`if (str[0 - 1] == '\n') followed closely by an OOB write in the form
`str[0 - 1] = '\0'`.
There is already a validating check to catch strings that are too long.
Let's supply an additional check for invalid strings that are too short.