Linux: >> Linux Kernel >> 5.4.172 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
cpu0 cpu1
j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)
=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
j1939_session_deactivate_activate_next+0x11/0x28
j1939_xtp_rx_eoma+0x12a/0x180
j1939_tp_recv+0x4a2/0x510
j1939_can_recv+0x226/0x380
can_rcv_filter+0xf8/0x220
can_receive+0x102/0x220
? process_backlog+0xf0/0x2c0
can_rcv+0x53/0xf0
__netif_receive_skb_one_core+0x67/0x90
? process_backlog+0x97/0x2c0
__netif_receive_skb+0x22/0x80
CVSS Score
5.5
EPSS Score
0.001
Published
2025-03-27
In the Linux kernel, the following vulnerability has been resolved:
ipvlan: ensure network headers are in skb linear part
syzbot found that ipvlan_process_v6_outbound() was assuming
the IPv6 network header isis present in skb->head [1]
Add the needed pskb_network_may_pull() calls for both
IPv4 and IPv6 handlers.
[1]
BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
__ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
ipv6_addr_type include/net/ipv6.h:555 [inline]
ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline]
ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651
ip6_route_output include/net/ip6_route.h:93 [inline]
ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476
ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline]
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline]
ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671
ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223
__netdev_start_xmit include/linux/netdevice.h:5150 [inline]
netdev_start_xmit include/linux/netdevice.h:5159 [inline]
xmit_one net/core/dev.c:3735 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751
sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343
qdisc_restart net/sched/sch_generic.c:408 [inline]
__qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416
qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127
net_tx_action+0x78b/0x940 net/core/dev.c:5484
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
do_softirq+0x9a/0x100 kernel/softirq.c:462
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611
dev_queue_xmit include/linux/netdevice.h:3311 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3132 [inline]
packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164
sock_sendmsg_nosec net/socket.c:718 [inline]
CVSS Score
5.5
EPSS Score
0.001
Published
2025-03-27
In the Linux kernel, the following vulnerability has been resolved:
uprobes: Reject the shared zeropage in uprobe_write_opcode()
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ]
CVSS Score
5.5
EPSS Score
0.001
Published
2025-03-27
In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
[1] Syzbot report:
usb 5-1: Manufacturer: syz
usb 5-1: SerialNumber: syz
usb 5-1: config 0 descriptor??
gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ...
------------[ cut here ]------------
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Modules linked in:
CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:3827 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_resolve_output net/core/neighbour.c:1514 [inline]
neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494
neigh_output include/net/neighbour.h:539 [inline]
ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819
mld_send_cr net/ipv6/mcast.c:2120 [inline]
mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
CVSS Score
5.5
EPSS Score
0.001
Published
2025-03-27
In the Linux kernel, the following vulnerability has been resolved:
sched/core: Prevent rescheduling when interrupts are disabled
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
CVSS Score
5.5
EPSS Score
0.001
Published
2025-03-27
In the Linux kernel, the following vulnerability has been resolved:
tee: optee: Fix supplicant wait loop
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-03-27
In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
If migration succeeded, we called
folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the
old to the new folio. This will set memcg_data of the old folio to 0.
Similarly, if migration failed, memcg_data of the dst folio is left unset.
If we call folio_putback_lru() on such folios (memcg_data == 0), we will
add the folio to be freed to the LRU, making memcg code unhappy. Running
the hmm selftests:
# ./hmm-tests
...
# RUN hmm.hmm_device_private.migrate ...
[ 102.078007][T14893] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff27d200 pfn:0x13cc00
[ 102.079974][T14893] anon flags: 0x17ff00000020018(uptodate|dirty|swapbacked|node=0|zone=2|lastcpupid=0x7ff)
[ 102.082037][T14893] raw: 017ff00000020018 dead000000000100 dead000000000122 ffff8881353896c9
[ 102.083687][T14893] raw: 00000007ff27d200 0000000000000000 00000001ffffffff 0000000000000000
[ 102.085331][T14893] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 102.087230][T14893] ------------[ cut here ]------------
[ 102.088279][T14893] WARNING: CPU: 0 PID: 14893 at ./include/linux/memcontrol.h:726 folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.090478][T14893] Modules linked in:
[ 102.091244][T14893] CPU: 0 UID: 0 PID: 14893 Comm: hmm-tests Not tainted 6.13.0-09623-g6c216bc522fd #151
[ 102.093089][T14893] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
[ 102.094848][T14893] RIP: 0010:folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.096104][T14893] Code: ...
[ 102.099908][T14893] RSP: 0018:ffffc900236c37b0 EFLAGS: 00010293
[ 102.101152][T14893] RAX: 0000000000000000 RBX: ffffea0004f30000 RCX: ffffffff8183f426
[ 102.102684][T14893] RDX: ffff8881063cb880 RSI: ffffffff81b8117f RDI: ffff8881063cb880
[ 102.104227][T14893] RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
[ 102.105757][T14893] R10: 0000000000000001 R11: 0000000000000002 R12: ffffc900236c37d8
[ 102.107296][T14893] R13: ffff888277a2bcb0 R14: 000000000000001f R15: 0000000000000000
[ 102.108830][T14893] FS: 00007ff27dbdd740(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
[ 102.110643][T14893] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.111924][T14893] CR2: 00007ff27d400000 CR3: 000000010866e000 CR4: 0000000000750ef0
[ 102.113478][T14893] PKRU: 55555554
[ 102.114172][T14893] Call Trace:
[ 102.114805][T14893] <TASK>
[ 102.115397][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.116547][T14893] ? __warn.cold+0x110/0x210
[ 102.117461][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.118667][T14893] ? report_bug+0x1b9/0x320
[ 102.119571][T14893] ? handle_bug+0x54/0x90
[ 102.120494][T14893] ? exc_invalid_op+0x17/0x50
[ 102.121433][T14893] ? asm_exc_invalid_op+0x1a/0x20
[ 102.122435][T14893] ? __wake_up_klogd.part.0+0x76/0xd0
[ 102.123506][T14893] ? dump_page+0x4f/0x60
[ 102.124352][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.125500][T14893] folio_batch_move_lru+0xd4/0x200
[ 102.126577][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.127505][T14893] __folio_batch_add_and_move+0x391/0x720
[ 102.128633][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.129550][T14893] folio_putback_lru+0x16/0x80
[ 102.130564][T14893] migrate_device_finalize+0x9b/0x530
[ 102.131640][T14893] dmirror_migrate_to_device.constprop.0+0x7c5/0xad0
[ 102.133047][T14893] dmirror_fops_unlocked_ioctl+0x89b/0xc80
Likely, nothing else goes wrong: putting the last folio reference will
remove the folio from the LRU again. So besides memcg complaining, adding
the folio to be freed to the LRU is just an unnecessary step.
The new flow resembles what we have in migrate_folio_move(): add the dst
to the lru, rem
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-03-12
In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix incorrect initialization order
Syzkaller reports the following bug:
BUG: spinlock bad magic on CPU#1, syz-executor.0/7995
lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x119/0x179 lib/dump_stack.c:118
debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline]
do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline]
_raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159
reset_per_cpu_data+0xe6/0x240 [drop_monitor]
net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor]
genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800
netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497
genl_rcv+0x29/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x157/0x190 net/socket.c:663
____sys_sendmsg+0x712/0x870 net/socket.c:2378
___sys_sendmsg+0xf8/0x170 net/socket.c:2432
__sys_sendmsg+0xea/0x1b0 net/socket.c:2461
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x62/0xc7
RIP: 0033:0x7f3f9815aee9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9
RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007
RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768
If drop_monitor is built as a kernel module, syzkaller may have time
to send a netlink NET_DM_CMD_START message during the module loading.
This will call the net_dm_monitor_start() function that uses
a spinlock that has not yet been initialized.
To fix this, let's place resource initialization above the registration
of a generic netlink family.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-03-12
In the Linux kernel, the following vulnerability has been resolved:
powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC
Erhard reported the following KASAN hit while booting his PowerMac G4
with a KASAN-enabled kernel 6.13-rc6:
BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8
Write of size 8 at addr f1000000 by task chronyd/1293
CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2
Tainted: [W]=WARN
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable)
[c24375b0] [c0504998] print_report+0xdc/0x504
[c2437610] [c050475c] kasan_report+0xf8/0x108
[c2437690] [c0505a3c] kasan_check_range+0x24/0x18c
[c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8
[c24376c0] [c004c014] patch_instructions+0x15c/0x16c
[c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c
[c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac
[c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec
[c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478
[c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14
[c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4
[c24379d0] [c027111c] do_seccomp+0x3dc/0x1890
[c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420
[c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c
--- interrupt: c00 at 0x5a1274
NIP: 005a1274 LR: 006a3b3c CTR: 005296c8
REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4)
MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000
GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932
GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57
GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002
GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001
NIP [005a1274] 0x5a1274
LR [006a3b3c] 0x6a3b3c
--- interrupt: c00
The buggy address belongs to the virtual mapping at
[f1000000, f1002000) created by:
text_area_cpu_up+0x20/0x190
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30
flags: 0x80000000(zone=2)
raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not
initialised hence not supposed to be used yet.
Powerpc text patching infrastructure allocates a virtual memory area
using get_vm_area() and flags it as VM_ALLOC. But that flag is meant
to be used for vmalloc() and vmalloc() allocated memory is not
supposed to be used before a call to __vmalloc_node_range() which is
never called for that area.
That went undetected until commit e4137f08816b ("mm, kasan, kmsan:
instrument copy_from/to_kernel_nofault")
The area allocated by text_area_cpu_up() is not vmalloc memory, it is
mapped directly on demand when needed by map_kernel_page(). There is
no VM flag corresponding to such usage, so just pass no flag. That way
the area will be unpoisonned and usable immediately.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-03-12
In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Don't reference skb after sending to VIOS
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
CVSS Score
7.8
EPSS Score
0.0
Published
2025-03-12