Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg
Check bounds against the end of the BO whenever we access the msg.
CVSS Score
7.1
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix controller deregistration
Make sure to deregister the controller before disabling and releasing
underlying resources like interrupts and gpios during driver unbind.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51)
CVSS Score
7.8
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: run inactivity autodim from workqueues
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer".
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: fix unclocked access on unbind
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix.
CVSS Score
7.1
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
sound: ua101: fix division by zero at probe
Add a missing sanity check for bNrChannels in detect_usb_format()
to prevent a division by zero in playback_urb_complete() and
capture_urb_complete().
USB core does not validate class-specific descriptor fields such
as bNrChannels, so drivers must verify them before use. If a
device provides bNrChannels = 0, frame_bytes becomes zero and is
later used as a divisor in the URB completion handlers, leading
to a kernel crash.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix out-of-bounds read in symlink_data()
Since smb2_check_message() returns success without length validation for
the symlink error response, in symlink_data() it is possible for
iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer
only contains the base SMB2 header (64 bytes), accessing
err->ErrorContextCount (at offset 66) or err->ByteCount later in
symlink_data() will cause an out-of-bounds read.
CVSS Score
9.1
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: validate rx pkt_type header length
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
RSI driver use both self-exit(kthread_complete_and_exit) and external-stop
(kthread_stop) when killing a kthread. Generally, kthread_stop() is called
first, and in this case, no particular issues occur.
However, in rare instances where kthread_complete_and_exit() is called
first and then kthread_stop() is called, a UAF occurs because the kthread
object, which has already exited and been freed, is accessed again.
Therefore, to prevent this with minimal modification, you must remove
kthread_stop() and change the code to wait until the self-exit operation
is completed.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
octeon_ep_vf: add NULL check for napi_build_skb()
napi_build_skb() can return NULL on allocation failure. In
__octep_vf_oq_process_rx(), the result is used directly without a NULL
check in both the single-buffer and multi-fragment paths, leading to a
NULL pointer dereference.
Add NULL checks after both napi_build_skb() calls, properly advancing
descriptors and consuming remaining fragments on failure.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-28