Linux: >> Linux Kernel >> 6.1.52 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node blkaddr in truncate_node()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2534!
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909
f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288
f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856
evict+0x4e8/0x9b0 fs/inode.c:723
f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986
f2fs_create+0x357/0x530 fs/f2fs/namei.c:394
lookup_open fs/namei.c:3595 [inline]
open_last_lookups fs/namei.c:3694 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3930
do_filp_open+0x235/0x490 fs/namei.c:3960
do_sys_openat2+0x13e/0x1d0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be
corrupted, then it will cause system panic when using it in
f2fs_invalidate_blocks(), to avoid this, let's add sanity check on
nat blkaddr in truncate_node().
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
brd: defer automatic disk creation until module initialization succeeds
My colleague Wupeng found the following problems during fault injection:
BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
<TASK>
blkdev_put_whole+0x41/0x70
bdev_release+0x1a3/0x250
blkdev_release+0x11/0x20
__fput+0x1d7/0x4a0
task_work_run+0xfc/0x180
syscall_exit_to_user_mode+0x1de/0x1f0
do_syscall_64+0x6b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().
brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:
case 1:
T1:
modprobe brd
brd_init
brd_alloc(0) // success
add_disk
disk_scan_partitions
bdev_file_open_by_dev // alloc file
fput // won't free until back to userspace
brd_alloc(1) // failed since mem alloc error inject
// error path for modprobe will release code segment
// back to userspace
__fput
blkdev_release
bdev_release
blkdev_put_whole
bdev->bd_disk->fops->release // fops is freed now, UAF!
case 2:
T1: T2:
modprobe brd
brd_init
brd_alloc(0) // success
open(/dev/ram0)
brd_alloc(1) // fail
// error path for modprobe
close(/dev/ram0)
...
/* UAF! */
bdev->bd_disk->fops->release
Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
usb: musb: Fix hardware lockup on first Rx endpoint request
There is a possibility that a request's callback could be invoked from
usb_ep_queue() (call trace below, supplemented with missing calls):
req->complete from usb_gadget_giveback_request
(drivers/usb/gadget/udc/core.c:999)
usb_gadget_giveback_request from musb_g_giveback
(drivers/usb/musb/musb_gadget.c:147)
musb_g_giveback from rxstate
(drivers/usb/musb/musb_gadget.c:784)
rxstate from musb_ep_restart
(drivers/usb/musb/musb_gadget.c:1169)
musb_ep_restart from musb_ep_restart_resume_work
(drivers/usb/musb/musb_gadget.c:1176)
musb_ep_restart_resume_work from musb_queue_resume_work
(drivers/usb/musb/musb_core.c:2279)
musb_queue_resume_work from musb_gadget_queue
(drivers/usb/musb/musb_gadget.c:1241)
musb_gadget_queue from usb_ep_queue
(drivers/usb/gadget/udc/core.c:300)
According to the docstring of usb_ep_queue(), this should not happen:
"Note that @req's ->complete() callback must never be called from within
usb_ep_queue() as that can create deadlock situations."
In fact, a hardware lockup might occur in the following sequence:
1. The gadget is initialized using musb_gadget_enable().
2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an
interrupt.
3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an
empty queue (next_request() returns NULL). The interrupt flag has
already been cleared by the glue layer handler, but the RXPKTRDY flag
remains set.
4. The first request is enqueued using usb_ep_queue(), leading to the call
of req->complete(), as shown in the call trace above.
5. If the callback enables IRQs and another packet is waiting, step (3)
repeats. The request queue is empty because usb_g_giveback() removes the
request before invoking the callback.
6. The endpoint remains locked up, as the interrupt triggered by hardware
setting the RXPKTRDY flag has been handled, but the flag itself remains
set.
For this scenario to occur, it is only necessary for IRQs to be enabled at
some point during the complete callback. This happens with the USB Ethernet
gadget, whose rx_complete() callback calls netif_rx(). If called in the
task context, netif_rx() disables the bottom halves (BHs). When the BHs are
re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The
gadget itself is initialized at module load (or at boot if built-in), but
the first request is enqueued when the network interface is brought up,
triggering rx_complete() in the task context via ioctl(). If a packet
arrives while the interface is down, it can prevent the interface from
receiving any further packets from the USB host.
The situation is quite complicated with many parties involved. This
particular issue can be resolved in several possible ways:
1. Ensure that callbacks never enable IRQs. This would be difficult to
enforce, as discovering how netif_rx() interacts with interrupts was
already quite challenging and u_ether is not the only function driver.
Similar "bugs" could be hidden in other drivers as well.
2. Disable MUSB interrupts in musb_g_giveback() before calling the callback
and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(),
for example). This would ensure that MUSB interrupts are not handled
during the callback, even if IRQs are enabled. In fact, it would allow
IRQs to be enabled when releasing the lock. However, this feels like an
inelegant hack.
3. Modify the interrupt handler to clear the RXPKTRDY flag if the request
queue is empty. While this approach also feels like a hack, it wastes
CPU time by attempting to handle incoming packets when the software is
not ready to process them.
4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart().
This ensures that the hardware can receive packets when there is at
least one request in the queue. Once I
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
Since transport->sock has been set to NULL during reset transport,
XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the
xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request()
to dereference the transport->sock that has been set to NULL.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hdmi: Avoid hang with debug registers when suspended
Trying to read /sys/kernel/debug/dri/1/hdmi1_regs
when the hdmi is disconnected results in a fatal system hang.
This is due to the pm suspend code disabling the dvp clock.
That is just a gate of the 108MHz clock in DVP_HT_RPI_MISC_CONFIG,
which results in accesses hanging AXI bus.
Protect against this.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.c
Add error pointer check after calling otx2_mbox_get_rsp().
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
crypto: bcm - add error check in the ahash_hmac_init function
The ahash_init functions may return fails. The ahash_hmac_init should
not return ok when ahash_init returns error. For an example, ahash_init
will return -ENOMEM when allocation memory is error.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init()
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm/fault: Fix kfence page fault reporting
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via
copy_from_kernel_nofault() can cause page faults. Since *_nofault()
functions define their own fixup table for handling fault, use that
instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the
fault. If there is an entry then we let the fixup table handler handle the
page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
===============================
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0
Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0
Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix UAF in blkcg_unpin_online()
blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To
walk up, it uses blkcg_parent(blkcg) but it was calling that after
blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the
following UAF:
==================================================================
BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270
Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117
CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
<TASK>
dump_stack_lvl+0x27/0x80
print_report+0x151/0x710
kasan_report+0xc0/0x100
blkcg_unpin_online+0x15a/0x270
cgwb_release_workfn+0x194/0x480
process_scheduled_works+0x71b/0xe20
worker_thread+0x82a/0xbd0
kthread+0x242/0x2c0
ret_from_fork+0x33/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
...
Freed by task 1944:
kasan_save_track+0x2b/0x70
kasan_save_free_info+0x3c/0x50
__kasan_slab_free+0x33/0x50
kfree+0x10c/0x330
css_free_rwork_fn+0xe6/0xb30
process_scheduled_works+0x71b/0xe20
worker_thread+0x82a/0xbd0
kthread+0x242/0x2c0
ret_from_fork+0x33/0x70
ret_from_fork_asm+0x1a/0x30
Note that the UAF is not easy to trigger as the free path is indirected
behind a couple RCU grace periods and a work item execution. I could only
trigger it with artifical msleep() injected in blkcg_unpin_online().
Fix it by reading the parent pointer before destroying the blkcg's blkg's.
CVSS Score
7.0
EPSS Score
0.0
Published
2024-12-27