A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on EX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.
With a specific request to installAppPackage.php that doesn't require authentication an attacker is able to upload arbitrary files via J-Web, leading to a loss of
integrity
for a certain
part of the file system, which may allow chaining to other vulnerabilities.
This issue affects Juniper Networks Junos OS on EX Series:
* All versions prior to 20.4R3-S8;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions
prior to
21.3R3-S5;
* 21.4 versions
prior to
21.4R3-S4;
* 22.1 versions
prior to
22.1R3-S3;
* 22.2 versions
prior to
22.2R3-S1;
* 22.3 versions
prior to
22.3R2-S2, 22.3R3;
* 22.4 versions
prior to
22.4R2-S1, 22.4R3.
An Improper Validation of Specified Index, Position, or Offset in Input vulnerability in the Connectivity Fault Management(CFM) module of Juniper Networks Junos OS on MX Series(except MPC10, MPC11 and LC9600) allows an adjacent attacker on the local broadcast domain to cause a Denial of Service(DoS).
Upon receiving a malformed CFM packet, the MPC crashes. Continued receipt of these packets causes a sustained denial of service. This issue can only be triggered when CFM hasn't been configured.
This issue affects:
Juniper Networks Junos OS
All versions prior to 19.1R3-S10 on MX Series;
19.2 versions prior to 19.2R3-S7 on MX Series;
19.3 versions prior to 19.3R3-S8 on MX Series;
19.4 versions prior to 19.4R3-S12 on MX Series;
20.1 version 20.1R1 and later versions on MX Series;
20.2 versions prior to 20.2R3-S7 on MX Series;
20.3 version 20.3R1 and later versions on MX Series;
20.4 versions prior to 20.4R3-S7 on MX Series;
21.1 versions prior to 21.1R3-S5 on MX Series;
21.2 versions prior to 21.2R3-S4 on MX Series;
21.3 versions prior to 21.3R3-S4 on MX Series;
21.4 versions prior to 21.4R3-S3 on MX Series;
22.1 versions prior to 22.1R3-S2 on MX Series;
22.2 versions prior to 22.2R3 on MX Series;
22.3 versions prior to 22.3R2, 22.3R3 on MX Series;
22.4 versions prior to 22.4R2 on MX Series.
An Incomplete Internal State Distinction vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series allows an adjacent attacker to cause a Denial of Service (DoS).
If an SRX is configured in L2 transparent mode the receipt of a specific genuine packet can cause a single Packet Processing Engines (PPE) component of the PFE to run into a loop, which in turn will render the PPE unavailable. Each packet will cause one PPE to get into a loop, leading to a gradual performance degradation until all PPEs are unavailable and all traffic processing stops. To recover the affected FPC need to be restarted.
This issue affects Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series:
20.1 version 20.1R1 and later versions;
20.2 versions prior to 20.2R3-S7;
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S7;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S3;
21.3 versions prior to 21.3R3-S3;
21.4 versions prior to 21.4R3-S1;
22.1 versions prior to 22.1R3;
22.2 versions prior to 22.2R2;
22.3 versions prior to 22.3R1-S1, 22.3R2.
A Use of an Uninitialized Resource vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial of Service (DoS).
On all Junos OS and Junos OS Evolved platforms, in a Multicast only Fast Reroute (MoFRR) scenario, the rpd process can crash when a a specific low privileged CLI command is executed. The rpd crash will impact all routing protocols until the process has automatically been restarted. As the operational state which makes this issue exploitable is outside the attackers control, this issue is considered difficult to exploit. Continued execution of this command will lead to a sustained DoS.
This issue affects:
Juniper Networks Junos OS
19.4 version 19.4R3-S5 and later versions prior to 19.4R3-S9;
20.1 version 20.1R2 and later versions;
20.2 versions prior to 20.2R3-S7;
20.3 versions prior to 20.3R3-S5;
20.4 versions prior to 20.4R3-S6;
21.1 versions prior to 21.1R3-S4;
21.2 versions prior to 21.2R3-S2;
21.3 versions prior to 21.3R3-S1;
21.4 versions prior to 21.4R3;
22.1 versions prior to 22.1R1-S2, 22.1R2;
22.2 versions prior to 22.2R2.
Juniper Networks Junos OS Evolved
All versions prior to 20.4R3-S6-EVO;
21.1-EVO version 21.1R1-EVO and later versions;
21.2-EVO version 21.2R1-EVO and later versions;
21.3-EVO versions prior to 21.3R3-S1-EVO;
21.4-EVO versions prior to 21.4R3-EVO;
22.1-EVO versions prior to 22.1R1-S2-EVO, 22.1R2-EVO;
22.2-EVO versions prior to 22.2R2-EVO.
A Reachable Assertion vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a locally-based, low-privileged attacker to cause a Denial of Service (DoS).
On all Junos OS and Junos OS Evolved, when a specific L2VPN command is run, RPD will crash and restart. Continued execution of this specific command will create a sustained Denial of Service (DoS) condition.
This issue affects:
Juniper Networks Junos OS
All versions prior to 19.3R3-S10;
20.1 versions prior to 20.1R3-S4;
20.2 versions prior to 20.2R3-S6;
20.3 versions prior to 20.3R3-S6;
20.4 versions prior to 20.4R3-S5;
21.1 versions prior to 21.1R3-S4;
21.2 versions prior to 21.2R3-S3;
21.3 versions prior to 21.3R3-S2;
21.4 versions prior to 21.4R3;
22.1 versions prior to 22.1R3;
22.2 versions prior to 22.2R2;
22.3 versions prior to 22.3R2;
Juniper Networks Junos OS Evolved
All versions prior to 20.4R3-S7-EVO;
21.1 versions prior to 21.1R3-S3-EVO;
21.2 versions prior to 21.2R3-S5-EVO;
21.3 versions prior to 21.3R3-S4-EVO;
21.4 versions prior to 21.4R3-EVO;
22.1 versions prior to 22.1R3-EVO;
22.2 versions prior to 22.2R2-EVO;
22.3 versions prior to 22.3R2-EVO;
An Improper Handling of Undefined Values vulnerability in the periodic packet management daemon (PPMD) of Juniper Networks Junos OS on MX Series(except MPC10, MPC11 and LC9600) allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS).
When a malformed CFM packet is received, it leads to an FPC crash. Continued receipt of these packets causes a sustained denial of service. This vulnerability occurs only when CFM has been configured on the interface.
This issue affects Juniper Networks Junos OS:
versions prior to 19.1R3-S10 on MX Series;
19.2 versions prior to 19.2R3-S7 on MX Series;
19.3 versions prior to 19.3R3-S8 on MX Series;
19.4 versions prior to 19.4R3-S12 on MX Series;
20.1 version 20.1R1 and later versions on MX Series;
20.2 versions prior to 20.2R3-S8 on MX Series;
20.3 version 20.3R1 and later versions on MX Series;
20.4 versions prior to 20.4R3-S7 on MX Series;
21.1 versions prior to 21.1R3-S5 on MX Series;
21.2 versions prior to 21.2R3-S5 on MX Series;
21.3 versions prior to 21.3R3-S4 on MX Series;
21.4 versions prior to 21.4R3-S4 on MX Series;
22.1 versions prior to 22.1R3-S3 on MX Series;
22.2 versions prior to 22.2R3-S1 on MX Series;
22.3 versions prior to 22.3R3 on MX Series;
22.4 versions prior to 22.4R1-S2, 22.4R2 on MX Series.
An Out-of-bounds Read vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a local, authenticated attacker with low privileges, to cause a Denial of Service (DoS).
If a low privileged user executes a specific CLI command, flowd which is responsible for traffic forwarding in SRX crashes and generates a core dump. This will cause temporary traffic interruption until the flowd process is restarted automatically. Continued execution of this command will lead to a sustained DoS.
This issue affects Juniper Networks Junos OS on SRX Series:
All versions prior to 20.2R3-S7;
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S6;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S4;
21.3 versions prior to 21.3R3-S4;
21.4 versions prior to 21.4R3-S3;
22.1 versions prior to 22.1R3-S1;
22.2 versions prior to 22.2R3;
22.3 versions prior to 22.3R2;
22.4 versions prior to 22.4R1-S1, 22.4R2.
An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When a BGP update message is received over an established BGP session, and that message contains a specific, optional transitive attribute, this session will be torn down with an update message error. This issue cannot propagate beyond an affected system as the processing error occurs as soon as the update is received. This issue is exploitable remotely as the respective attribute can propagate through unaffected systems and intermediate AS (if any). Continuous receipt of a BGP update containing this attribute will create a sustained Denial of Service (DoS) condition. Some customers have experienced these BGP session flaps which prompted Juniper SIRT to release this advisory out of cycle before fixed releases are widely available as there is an effective workaround.
This issue affects:
Juniper Networks Junos OS
15.1R1 and later versions prior to 20.4R3-S8;
21.1 version 21.1R1 and later versions prior to 21.2R3-S6;
21.3 versions prior to 21.3R3-S5;
21.4 versions prior to 21.4R3-S4;
22.1 versions prior to 22.1R3-S4;
22.2 versions prior to 22.2R3-S2;
22.3 versions prior to 22.3R2-S2, 22.3R3-S1;
22.4 versions prior to 22.4R2-S1, 22.4R3;
23.1 versions prior to 23.1R1-S1, 23.1R2.
Juniper Networks Junos OS Evolved
All versions prior to 20.4R3-S8-EVO;
21.1 version 21.1R1-EVO and later versions prior to 21.2R3-S6-EVO;
21.3 versions prior to 21.3R3-S5-EVO;
21.4 versions prior to 21.4R3-S4-EVO;
22.1 versions prior to 22.1R3-S4-EVO;
22.2 versions prior to 22.2R3-S2-EVO;
22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO;
22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO;
23.1 versions prior to 23.1R1-S1-EVO, 23.1R2-EVO.
An Improper Check or Handling of Exceptional Conditions vulnerability in packet processing on the network interfaces of Juniper Networks Junos OS on JRR200 route reflector appliances allows an adjacent, network-based attacker sending a specific packet to the device to cause a kernel crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue can only be triggered by an attacker on the local broadcast domain. Packets routed to the device are unable to trigger this crash. This issue affects Juniper Networks Junos OS on JRR200: All versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S2, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; 22.4 versions prior to 22.4R1-S1, 22.4R2.
An Improper Handling of Unexpected Data Type vulnerability in IPv6 firewall filter processing of Juniper Networks Junos OS on the ACX Series devices will prevent a firewall filter with the term 'from next-header ah' from being properly installed in the packet forwarding engine (PFE). There is no immediate indication of an incomplete firewall filter commit shown at the CLI, which could allow an attacker to send valid packets to or through the device that were explicitly intended to be dropped. An indication that the filter was not installed can be identified with the following logs: fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_rule_prepare : Config failed: Unsupported Ip-protocol 51 in the filter lo0.0-inet6-i fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_rule_prepare : Please detach the filter, remove unsupported match and re-attach fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_process_rule : Status:104 dnx_dfw_rule_prepare failed fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_process_filter : Status:104 dnx_dfw_process_rule failed fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_update_filter_in_hw : Status:104 Could not process filter(lo0.0-inet6-i) for rule expansion Unsupported match, action present. fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_create_hw_instance : Status:104 Could not program dfw(lo0.0-inet6-i) type(IFP_DFLT_INET6_Lo0_FILTER)! [104] fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_bind_shim : [104] Could not create dfw(lo0.0-inet6-i) type(IFP_DFLT_INET6_Lo0_FILTER) fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_update_resolve : [100] Failed to bind filter(3) to bind point fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_change_end : dnx_dfw_update_resolve (resolve type) failed This issue affects Juniper Networks Junos OS on ACX Series: All versions prior to 20.2R3-S7; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R2.