Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 6.1.12  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: dm stats: check for and propagate alloc_percpu failure Check alloc_precpu()'s return value and return an error from dm_stats_init() if it fails. Update alloc_dev() to fail if dm_stats_init() does. Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup() even if dm-stats isn't being actively used.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: don't let userspace block driver unbind In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine: task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ... The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding: # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes) Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix race condition in hci_cmd_sync_clear There is a potential race condition in hci_cmd_sync_work and hci_cmd_sync_clear, and could lead to use-after-free. For instance, hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and causing kernel panic when it is used in 'hci_cmd_sync_work'. Here's the call trace: dump_stack_lvl+0x49/0x63 print_report.cold+0x5e/0x5d3 ? hci_cmd_sync_work+0x282/0x320 kasan_report+0xaa/0x120 ? hci_cmd_sync_work+0x282/0x320 __asan_report_load8_noabort+0x14/0x20 hci_cmd_sync_work+0x282/0x320 process_one_work+0x77b/0x11c0 ? _raw_spin_lock_irq+0x8e/0xf0 worker_thread+0x544/0x1180 ? poll_idle+0x1e0/0x1e0 kthread+0x285/0x320 ? process_one_work+0x11c0/0x11c0 ? kthread_complete_and_exit+0x30/0x30 ret_from_fork+0x22/0x30 </TASK> Allocated by task 266: kasan_save_stack+0x26/0x50 __kasan_kmalloc+0xae/0xe0 kmem_cache_alloc_trace+0x191/0x350 hci_cmd_sync_queue+0x97/0x2b0 hci_update_passive_scan+0x176/0x1d0 le_conn_complete_evt+0x1b5/0x1a00 hci_le_conn_complete_evt+0x234/0x340 hci_le_meta_evt+0x231/0x4e0 hci_event_packet+0x4c5/0xf00 hci_rx_work+0x37d/0x880 process_one_work+0x77b/0x11c0 worker_thread+0x544/0x1180 kthread+0x285/0x320 ret_from_fork+0x22/0x30 Freed by task 269: kasan_save_stack+0x26/0x50 kasan_set_track+0x25/0x40 kasan_set_free_info+0x24/0x40 ____kasan_slab_free+0x176/0x1c0 __kasan_slab_free+0x12/0x20 slab_free_freelist_hook+0x95/0x1a0 kfree+0xba/0x2f0 hci_cmd_sync_clear+0x14c/0x210 hci_unregister_dev+0xff/0x440 vhci_release+0x7b/0xf0 __fput+0x1f3/0x970 ____fput+0xe/0x20 task_work_run+0xd4/0x160 do_exit+0x8b0/0x22a0 do_group_exit+0xba/0x2a0 get_signal+0x1e4a/0x25b0 arch_do_signal_or_restart+0x93/0x1f80 exit_to_user_mode_prepare+0xf5/0x1a0 syscall_exit_to_user_mode+0x26/0x50 ret_from_fork+0x15/0x30
CVSS Score
4.7
EPSS Score
0.0
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix race condition in amdtee_open_session There is a potential race condition in amdtee_open_session that may lead to use-after-free. For instance, in amdtee_open_session() after sess->sess_mask is set, and before setting: sess->session_info[i] = session_info; if amdtee_close_session() closes this same session, then 'sess' data structure will be released, causing kernel panic when 'sess' is accessed within amdtee_open_session(). The solution is to set the bit sess->sess_mask as the last step in amdtee_open_session().
CVSS Score
4.7
EPSS Score
0.0
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix warning when handle discover_identity message Since both source and sink device can send discover_identity message in PD3, kernel may dump below warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0 Modules linked in: CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tcpm_queue_vdm+0xe0/0xf0 lr : tcpm_queue_vdm+0x2c/0xf0 sp : ffff80000c19bcd0 x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8 x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081 x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580 x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098 x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004 Call trace: tcpm_queue_vdm+0xe0/0xf0 tcpm_pd_rx_handler+0x340/0x1ab0 kthread_worker_fn+0xcc/0x18c kthread+0x10c/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Below sequences may trigger this warning: tcpm_send_discover_work(work) tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); tcpm_queue_vdm(port, header, data, count); port->vdm_state = VDM_STATE_READY; vdm_state_machine_work(work); <-- received discover_identity from partner vdm_run_state_machine(port); port->vdm_state = VDM_STATE_SEND_MESSAGE; mod_vdm_delayed_work(port, x); tcpm_pd_rx_handler(work); tcpm_pd_data_request(port, msg); tcpm_handle_vdm_request(port, msg->payload, cnt); tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); --> WARN_ON(port->vdm_state > VDM_STATE_DONE); For this case, the state machine could still send out discover identity message later if we skip current discover_identity message. So we should handle the received message firstly and override the pending discover_identity message without warning in this case. Then, a delayed send_discover work will send discover_identity message again.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: usb: ucsi: Fix NULL pointer deref in ucsi_connector_change() When ucsi_init() fails, ucsi->connector is NULL, yet in case of ucsi_acpi we may still get events which cause the ucs_acpi code to call ucsi_connector_change(), which then derefs the NULL ucsi->connector pointer. Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init() has succeeded, so that ucsi_connector_change() ignores the events because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). E.g. KVM will encounter a NULL pointer when attempting to add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to create a VM before vmx_init() configures said list. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel] <TASK> vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 [kvm] vcpu_load+0x2f/0x40 [kvm] kvm_arch_vcpu_create+0x231/0x310 [kvm] kvm_vm_ioctl+0x79f/0xe10 [kvm] ? handle_mm_fault+0xb1/0x220 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f5a6b05743b </TASK> Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy() The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a metadata array to/from user space, may copy uninitialized buffer regions to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO and NILFS_IOCTL_GET_CPINFO. This can occur when the element size of the user space metadata given by the v_size member of the argument nilfs_argv structure is larger than the size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo structure) on the file system side. KMSAN-enabled kernels detect this issue as follows: BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xc0/0x100 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0xc0/0x100 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:169 [inline] nilfs_ioctl_wrap_copy+0x6fa/0xc10 fs/nilfs2/ioctl.c:99 nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline] nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290 nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343 __do_compat_sys_ioctl fs/ioctl.c:968 [inline] __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910 __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9f6/0xe90 mm/page_alloc.c:5572 alloc_pages+0xab0/0xd80 mm/mempolicy.c:2287 __get_free_pages+0x34/0xc0 mm/page_alloc.c:5599 nilfs_ioctl_wrap_copy+0x223/0xc10 fs/nilfs2/ioctl.c:74 nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline] nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290 nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343 __do_compat_sys_ioctl fs/ioctl.c:968 [inline] __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910 __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Bytes 16-127 of 3968 are uninitialized ... This eliminates the leak issue by initializing the page allocated as buffer using get_zeroed_page().
CVSS Score
7.1
EPSS Score
0.001
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix call trace warning and hang when removing amdgpu device On GPUs with RAS enabled, below call trace and hang are observed when shutting down device. v2: use DRM device unplugged flag instead of shutdown flag as the check to prevent memory wipe in shutdown stage. [ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu] [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu] [ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu] [ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu] [ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu] [ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [ +0.000090] drm_dev_release+0x28/0x50 [drm] [ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm] [ +0.000011] devm_action_release+0x15/0x20 [ +0.000003] release_nodes+0x40/0xc0 [ +0.000001] devres_release_all+0x9e/0xe0 [ +0.000001] device_unbind_cleanup+0x12/0x80 [ +0.000003] device_release_driver_internal+0xff/0x160 [ +0.000001] driver_detach+0x4a/0x90 [ +0.000001] bus_remove_driver+0x6c/0xf0 [ +0.000001] driver_unregister+0x31/0x50 [ +0.000001] pci_unregister_driver+0x40/0x90 [ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-02
In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Bad drive in topology results kernel crash When the SAS Transport Layer support is enabled and a device exposed to the OS by the driver fails INQUIRY commands, the driver frees up the memory allocated for an internal HBA port data structure. However, in some places, the reference to the freed memory is not cleared. When the firmware sends the Device Info change event for the same device again, the freed memory is accessed and that leads to memory corruption and OS crash.
CVSS Score
7.8
EPSS Score
0.001
Published
2025-05-02


Contact Us

Shodan ® - All rights reserved