Linux: >> Linux Kernel >> 6.6.59 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add architecture specific huge_pte_clear()
When executing mm selftests run_vmtests.sh, there is such an error:
BUG: Bad page state in process uffd-unit-tests pfn:00000
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
flags: 0xffff0000002000(reserved|node=0|zone=0|lastcpupid=0xffff)
raw: 00ffff0000002000 ffffbf0000000008 ffffbf0000000008 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Modules linked in: snd_seq_dummy snd_seq snd_seq_device rfkill vfat fat
virtio_balloon efi_pstore virtio_net pstore net_failover failover fuse
nfnetlink virtio_scsi virtio_gpu virtio_dma_buf dm_multipath efivarfs
CPU: 2 UID: 0 PID: 1913 Comm: uffd-unit-tests Not tainted 6.12.0 #184
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
Stack : 900000047c8ac000 0000000000000000 9000000000223a7c 900000047c8ac000
900000047c8af690 900000047c8af698 0000000000000000 900000047c8af7d8
900000047c8af7d0 900000047c8af7d0 900000047c8af5b0 0000000000000001
0000000000000001 900000047c8af698 10b3c7d53da40d26 0000010000000000
0000000000000022 0000000fffffffff fffffffffe000000 ffff800000000000
000000000000002f 0000800000000000 000000017a6d4000 90000000028f8940
0000000000000000 0000000000000000 90000000025aa5e0 9000000002905000
0000000000000000 90000000028f8940 ffff800000000000 0000000000000000
0000000000000000 0000000000000000 9000000000223a94 000000012001839c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d
...
Call Trace:
[<9000000000223a94>] show_stack+0x5c/0x180
[<9000000001c3fd64>] dump_stack_lvl+0x6c/0xa0
[<900000000056aa08>] bad_page+0x1a0/0x1f0
[<9000000000574978>] free_unref_folios+0xbf0/0xd20
[<90000000004e65cc>] folios_put_refs+0x1a4/0x2b8
[<9000000000599a0c>] free_pages_and_swap_cache+0x164/0x260
[<9000000000547698>] tlb_batch_pages_flush+0xa8/0x1c0
[<9000000000547f30>] tlb_finish_mmu+0xa8/0x218
[<9000000000543cb8>] exit_mmap+0x1a0/0x360
[<9000000000247658>] __mmput+0x78/0x200
[<900000000025583c>] do_exit+0x43c/0xde8
[<9000000000256490>] do_group_exit+0x68/0x110
[<9000000000256554>] sys_exit_group+0x1c/0x20
[<9000000001c413b4>] do_syscall+0x94/0x130
[<90000000002216d8>] handle_syscall+0xb8/0x158
Disabling lock debugging due to kernel taint
BUG: non-zero pgtables_bytes on freeing mm: -16384
On LoongArch system, invalid huge pte entry should be invalid_pte_table
or a single _PAGE_HUGE bit rather than a zero value. And it should be
the same with invalid pmd entry, since pmd_none() is called by function
free_pgd_range() and pmd_none() return 0 by huge_pte_clear(). So single
_PAGE_HUGE bit is also treated as a valid pte table and free_pte_range()
will be called in free_pmd_range().
free_pmd_range()
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
free_pte_range(tlb, pmd, addr);
} while (pmd++, addr = next, addr != end);
Here invalid_pte_table is used for both invalid huge pte entry and
pmd entry.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix when get product name maybe null pointer
Due to incorrect dev->product reporting by certain devices, null
pointer dereferences occur when dev->product is empty, leading to
potential system crashes.
This issue was found on EXCELSIOR DL37-D05 device with
Loongson-LS3A6000-7A2000-DL37 motherboard.
Kernel logs:
[ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci
[ 56.671638] usb 4-3: string descriptor 0 read error: -22
[ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07
[ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0
[ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80
[ 56.697732] Oops[#1]:
[ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015
[ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024
[ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0
[ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000
[ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000
[ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005
[ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000
[ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028
[ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000
[ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000
[ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom]
[ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120
[ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE)
[ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
[ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 56.697835] BADV: 0000000000000000
[ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000)
[ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit
[ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3)
[ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000
[ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000
[ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0
[ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c
[ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440
[ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0
[ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c
[ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000
[ 56.697931] 90000001000bb8d0
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: free inode when ocfs2_get_init_inode() fails
syzbot is reporting busy inodes after unmount, for commit 9c89fe0af826
("ocfs2: Handle error from dquot_initialize()") forgot to call iput() when
new_inode() succeeded and dquot_initialize() failed.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Fix slab-use-after-free read in sg_release()
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup includes scheduling deferred work
via sg_remove_sfp_usercontext(), which ultimately frees sfp.
After kref_put(), sg_release() continues to unlock open_rel_lock and may
reference sfp or sdp. If sfp has already been freed, this results in a
slab-use-after-free error.
Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the
open_rel_lock mutex. This ensures:
- No references to sfp or sdp occur after the reference count is
decremented.
- Cleanup functions such as sg_remove_sfp() and
sg_remove_sfp_usercontext() can safely execute without impacting the
mutex handling in sg_release().
The fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures proper
sequencing of resource cleanup and mutex operations, eliminating the
risk of use-after-free errors in sg_release().
CVSS Score
7.8
EPSS Score
0.001
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
tcp_bpf: Fix the sk_mem_uncharge logic in tcp_bpf_sendmsg
The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging
tosend bytes, which is either msg->sg.size or a smaller value apply_bytes.
Potential problems with this strategy are as follows:
- If the actual sent bytes are smaller than tosend, we need to charge some
bytes back, as in line 487, which is okay but seems not clean.
- When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may
miss uncharging (msg->sg.size - apply_bytes) bytes.
[...]
415 tosend = msg->sg.size;
416 if (psock->apply_bytes && psock->apply_bytes < tosend)
417 tosend = psock->apply_bytes;
[...]
443 sk_msg_return(sk, msg, tosend);
444 release_sock(sk);
446 origsize = msg->sg.size;
447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress,
448 msg, tosend, flags);
449 sent = origsize - msg->sg.size;
[...]
454 lock_sock(sk);
455 if (unlikely(ret < 0)) {
456 int free = sk_msg_free_nocharge(sk, msg);
458 if (!cork)
459 *copied -= free;
460 }
[...]
487 if (eval == __SK_REDIRECT)
488 sk_mem_charge(sk, tosend - sent);
[...]
When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply,
the following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0
Modules linked in:
CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events sk_psock_destroy
RIP: 0010:inet_sock_destruct+0x190/0x1a0
RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206
RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800
RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900
RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0
R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400
R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100
FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x89/0x130
? inet_sock_destruct+0x190/0x1a0
? report_bug+0xfc/0x1e0
? handle_bug+0x5c/0xa0
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? inet_sock_destruct+0x190/0x1a0
__sk_destruct+0x25/0x220
sk_psock_destroy+0x2b2/0x310
process_scheduled_works+0xa3/0x3e0
worker_thread+0x117/0x240
? __pfx_worker_thread+0x10/0x10
kthread+0xcf/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
In __SK_REDIRECT, a more concise way is delaying the uncharging after sent
bytes are finalized, and uncharge this value. When (ret < 0), we shall
invoke sk_msg_free.
Same thing happens in case __SK_DROP, when tosend is set to apply_bytes,
we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same
warning will be reported in selftest.
[...]
468 case __SK_DROP:
469 default:
470 sk_msg_free_partial(sk, msg, tosend);
471 sk_msg_apply_bytes(psock, tosend);
472 *copied -= (tosend + delta);
473 return -EACCES;
[...]
So instead of sk_msg_free_partial we can do sk_msg_free here.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] <TASK>
[ 160.881477] ? __die+0x20/0x60
[ 160.884586] ? page_fault_oops+0x15a/0x450
[ 160.888746] ? search_extable+0x22/0x30
[ 160.892647] ? search_bpf_extables+0x5f/0x80
[ 160.896988] ? exc_page_fault+0xa9/0x140
[ 160.900973] ? asm_exc_page_fault+0x22/0x30
[ 160.905232] ? dev_map_free+0x77/0x170
[ 160.909043] ? dev_map_free+0x58/0x170
[ 160.912857] bpf_map_free_deferred+0x51/0x90
[ 160.917196] process_one_work+0x142/0x370
[ 160.921272] worker_thread+0x29e/0x3b0
[ 160.925082] ? rescuer_thread+0x4b0/0x4b0
[ 160.929157] kthread+0xd4/0x110
[ 160.932355] ? kthread_park+0x80/0x80
[ 160.936079] ret_from_fork+0x2d/0x50
[ 160.943396] ? kthread_park+0x80/0x80
[ 160.950803] ret_from_fork_asm+0x11/0x20
[ 160.958482] </TASK>
CVSS Score
7.8
EPSS Score
0.001
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix MST sideband message body length check
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
Commit
5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
adds functionality that architectures can use to optionally allocate and
build cacheinfo early during boot. Commit
6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
lets secondary CPUs correct (and reallocate memory) cacheinfo data if
needed.
If the early build functionality is not used and cacheinfo does not need
correction, memory for cacheinfo is never allocated. x86 does not use
the early build functionality. Consequently, during the cacheinfo CPU
hotplug callback, last_level_cache_is_valid() attempts to dereference
a NULL pointer:
BUG: kernel NULL pointer dereference, address: 0000000000000100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEPMT SMP NOPTI
CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1
RIP: 0010: last_level_cache_is_valid+0x95/0xe0a
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback
if not done earlier.
Moreover, before determining the validity of the last-level cache info,
ensure that it has been allocated. Simply checking for non-zero
cache_leaves() is not sufficient, as some architectures (e.g., Intel
processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come
online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
Syzbot reported that when searching for records in a directory where the
inode's i_size is corrupted and has a large value, memory access outside
the folio/page range may occur, or a use-after-free bug may be detected if
KASAN is enabled.
This is because nilfs_last_byte(), which is called by nilfs_find_entry()
and others to calculate the number of valid bytes of directory data in a
page from i_size and the page index, loses the upper 32 bits of the 64-bit
size information due to an inappropriate type of local variable to which
the i_size value is assigned.
This caused a large byte offset value due to underflow in the end address
calculation in the calling nilfs_find_entry(), resulting in memory access
that exceeds the folio/page size.
Fix this issue by changing the type of the local variable causing the bit
loss from "unsigned int" to "u64". The return value of nilfs_last_byte()
is also of type "unsigned int", but it is truncated so as not to exceed
PAGE_SIZE and no bit loss occurs, so no change is required.
CVSS Score
7.8
EPSS Score
0.001
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: qcom: Only free platform MSIs when ESI is enabled
Otherwise, it will result in a NULL pointer dereference as below:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Call trace:
mutex_lock+0xc/0x54
platform_device_msi_free_irqs_all+0x14/0x20
ufs_qcom_remove+0x34/0x48 [ufs_qcom]
platform_remove+0x28/0x44
device_remove+0x4c/0x80
device_release_driver_internal+0xd8/0x178
driver_detach+0x50/0x9c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom]
__arm64_sys_delete_module+0x180/0x260
invoke_syscall+0x44/0x100
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xdc
el0t_64_sync_handler+0xc0/0xc4
el0t_64_sync+0x190/0x194
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27