Linux: >> Linux Kernel >> 5.15.191 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2
After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncs
fields written by the CPU from vmcb02 to the cached vmcb12. This is
because the cached vmcb12 is used as the authoritative copy of some of
the controls, and is the payload when saving/restoring nested state.
int_state is also written by the CPU, specifically bit 0 (i.e.
SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd to
cached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATE
preceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadow
would be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwrites
what KVM_SET_NESTED_STATE restored in int_state).
However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, an
interrupt shadow would be restored into vmcb01 instead of vmcb02. This
would mostly be benign for L1 (delays an interrupt), but not for L2. For
L2, the vCPU could hang (e.g. if a wakeup interrupt is delivered before
a HLT that should have been in an interrupt shadow).
Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02()
to avoid this problem. With that, KVM_SET_NESTED_STATE restores the
correct interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows it
would overwrite it with the same value.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix re-decryption of RESPONSE packets
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE.
CVSS Score
9.8
EPSS Score
0.005
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
udf: fix partition descriptor append bookkeeping
Mounting a crafted UDF image with repeated partition descriptors can
trigger a heap out-of-bounds write in part_descs_loc[].
handle_partition_descriptor() deduplicates entries by partition number,
but appended slots never record partnum. As a result duplicate
Partition Descriptors are appended repeatedly and num_part_descs keeps
growing.
Once the table is full, the growth path still sizes the allocation from
partnum even though inserts are indexed by num_part_descs. If partnum is
already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep
the old capacity and the next append writes past the end of the table.
Store partnum in the appended slot and size growth from the next append
count so deduplication and capacity tracking follow the same model.
CVSS Score
7.8
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix OOB reads in command_file_write due to missing size checks
The command_file_write() handler allocates a kernel buffer of exactly
count bytes and copies user data into it, but does not validate the
buffer against the dot command protocol before passing it to
get_dot_command_size() and get_dot_command_timeout().
Since both the allocation size (count) and the header fields (command_size,
data_size) are independently user-controlled, an attacker can cause
get_dot_command_size() to return a value exceeding the allocation,
triggering OOB reads in get_dot_command_timeout() and an out-of-bounds
memcpy_toio() that leaks kernel heap memory to the service processor.
Fix with two guards: reject writes smaller than sizeof(struct
dot_command_header) before allocation, then after copying user data
reject commands where the buffer is smaller than the total size declared
by the header (sizeof(header) + command_size + data_size). This ensures
all subsequent header and payload field accesses stay within the buffer.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
nfsd: never defer requests during idmap lookup
During v4 request compound arg decoding, some ops (e.g. SETATTR)
can trigger idmap lookup upcalls. When those upcall responses get
delayed beyond the allowed time limit, cache_check() will mark the
request for deferral and cause it to be dropped.
This prevents nfs4svc_encode_compoundres from being executed, and
thus the session slot flag NFSD4_SLOT_INUSE never gets cleared.
Subsequent client requests will fail with NFSERR_JUKEBOX, given
that the slot will be marked as in-use, making the SEQUENCE op
fail.
Fix this by making sure that the RQ_USEDEFERRAL flag is always
clear during nfs4svc_decode_compoundargs(), since no v4 request
should ever be deferred.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in iomap inline data write path
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, ext4_iomap_alloc() call ext4_map_blocks() with
EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and
EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and
call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the
above flags set.
Then, ext4_split_convert_extents() calls ext4_split_extent() with
EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2
flags set, and it calls ext4_split_extent_at() to split the second half
with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT
and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()
failed to insert extent since a temporary lack -ENOSPC. It zeroes out
the first half but convert the entire on-disk extent to written since
the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten
in the extent status tree.
[0000000000SSSSSS] data S: stale data, 0: zeroed
[WWWWWWWWWWWWWWWW] on-disk extent W: written extent
[WWWWWWWWWWUUUUUU] extent status tree
Finally, if the DIO failed to write data to the disk, the stale data in
the second half will be exposed once the cached extent entry is gone.
Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting
an unwritten extent before submitting I/O, and make
ext4_split_convert_extents() to zero out the entire extent range
to zero for this case, and also mark the extent in the extent status
tree for consistency.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
crypto: ccree - fix a memory leak in cc_mac_digest()
Add cc_unmap_result() if cc_map_hash_request_final()
fails to prevent potential memory leak.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-27