In the Linux kernel, the following vulnerability has been resolved:
USB: core: Make do_proc_control() and do_proc_bulk() killable
The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke
usb_start_wait_urb(), which contains an uninterruptible wait with a
user-specified timeout value. If timeout value is very large and the
device being accessed does not respond in a reasonable amount of time,
the kernel will complain about "Task X blocked for more than N
seconds", as found in testing by syzbot:
INFO: task syz-executor.0:8700 blocked for more than 143 seconds.
Not tainted 5.14.0-rc7-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4681 [inline]
__schedule+0xc07/0x11f0 kernel/sched/core.c:5938
schedule+0x14b/0x210 kernel/sched/core.c:6017
schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857
do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157
usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63
do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236
proc_bulk drivers/usb/core/devio.c:1273 [inline]
usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline]
usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713
...
To fix this problem, this patch replaces usbfs's calls to
usb_control_msg() and usb_bulk_msg() with special-purpose code that
does essentially the same thing (as recommended in the comment for
usb_start_wait_urb()), except that it always uses a killable wait and
it uses GFP_KERNEL rather than GFP_NOIO.
In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Set lower bound of start tick time
Currently ALSA timer doesn't have the lower limit of the start tick
time, and it allows a very small size, e.g. 1 tick with 1ns resolution
for hrtimer. Such a situation may lead to an unexpected RCU stall,
where the callback repeatedly queuing the expire update, as reported
by fuzzer.
This patch introduces a sanity check of the timer start tick time, so
that the system returns an error when a too small start size is set.
As of this patch, the lower limit is hard-coded to 100us, which is
small enough but can still work somehow.
In the Linux kernel, the following vulnerability has been resolved:
macintosh/via-macii: Fix "BUG: sleeping function called from invalid context"
The via-macii ADB driver calls request_irq() after disabling hard
interrupts. But disabling interrupts isn't necessary here because the
VIA shift register interrupt was masked during VIA1 initialization.
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg
A data-race condition has been identified in af_unix. In one data path,
the write function unix_release_sock() atomically writes to
sk->sk_shutdown using WRITE_ONCE. However, on the reader side,
unix_stream_sendmsg() does not read it atomically. Consequently, this
issue is causing the following KCSAN splat to occur:
BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg
write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28:
unix_release_sock (net/unix/af_unix.c:640)
unix_release (net/unix/af_unix.c:1050)
sock_close (net/socket.c:659 net/socket.c:1421)
__fput (fs/file_table.c:422)
__fput_sync (fs/file_table.c:508)
__se_sys_close (fs/open.c:1559 fs/open.c:1541)
__x64_sys_close (fs/open.c:1541)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14:
unix_stream_sendmsg (net/unix/af_unix.c:2273)
__sock_sendmsg (net/socket.c:730 net/socket.c:745)
____sys_sendmsg (net/socket.c:2584)
__sys_sendmmsg (net/socket.c:2638 net/socket.c:2724)
__x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
value changed: 0x01 -> 0x03
The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7").
Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.")
addressed a comparable issue in the past regarding sk->sk_shutdown.
However, it overlooked resolving this particular data path.
This patch only offending unix_stream_sendmsg() function, since the
other reads seem to be protected by unix_state_lock() as discussed in
In the Linux kernel, the following vulnerability has been resolved:
ALSA: Fix deadlocks with kctl removals at disconnection
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now.
In the Linux kernel, the following vulnerability has been resolved:
epoll: be better about file lifetimes
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential hang in nilfs_detach_log_writer()
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
nilfs_detach_log_writer
nilfs_segctor_destroy
nilfs_segctor_kill_thread --> Shut down log writer thread
flush_work
nilfs_iput_work_func
nilfs_dispose_list
iput
nilfs_evict_inode
nilfs_transaction_commit
nilfs_construct_segment (if inode needs sync)
nilfs_segctor_sync --> Attempt to synchronize with
log writer thread
*** DEADLOCK ***
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: xmit: make sure we have at least eth header len bytes
syzbot triggered an uninit value[1] error in bridge device's xmit path
by sending a short (less than ETH_HLEN bytes) skb. To fix it check if
we can actually pull that amount instead of assuming.
Tested with dropwatch:
drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3)
origin: software
timestamp: Mon May 13 11:31:53 2024 778214037 nsec
protocol: 0x88a8
length: 2
original length: 2
drop reason: PKT_TOO_SMALL
[1]
BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65
br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
__bpf_tx_skb net/core/filter.c:2136 [inline]
__bpf_redirect_common net/core/filter.c:2180 [inline]
__bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187
____bpf_clone_redirect net/core/filter.c:2460 [inline]
bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432
___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997
__bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238
bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline]
__bpf_prog_run include/linux/filter.h:657 [inline]
bpf_prog_run include/linux/filter.h:664 [inline]
bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425
bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058
bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269
__sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678
__do_sys_bpf kernel/bpf/syscall.c:5767 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5765 [inline]
__x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765
x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f