Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 2.0.26  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: f2fs: remove WARN_ON in f2fs_is_valid_blkaddr Syzbot triggers two WARNs in f2fs_is_valid_blkaddr and __is_bitmap_valid. For example, in f2fs_is_valid_blkaddr, if type is DATA_GENERIC_ENHANCE or DATA_GENERIC_ENHANCE_READ, it invokes WARN_ON if blkaddr is not in the right range. The call trace is as follows: f2fs_get_node_info+0x45f/0x1070 read_node_page+0x577/0x1190 __get_node_page.part.0+0x9e/0x10e0 __get_node_page f2fs_get_node_page+0x109/0x180 do_read_inode f2fs_iget+0x2a5/0x58b0 f2fs_fill_super+0x3b39/0x7ca0 Fix these two WARNs by replacing WARN_ON with dump_stack.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: xprtrdma: treat all calls not a bcall when bc_serv is NULL When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ...
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: USB: host: isp116x: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192eu: Fix deadlock in rtw_joinbss_event_prehandle There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_joinbss_event_prehandle()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | rtw_join_timeout_handler() | _rtw_join_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_joinbss_event_prehandle() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() to spin_lock_irq() in _rtw_join_timeout_handler() in order to prevent deadlock.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: drivers: tty: serial: Fix deadlock in sa1100_set_termios() There is a deadlock in sa1100_set_termios(), which is shown below: (Thread 1) | (Thread 2) | sa1100_enable_ms() sa1100_set_termios() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | sa1100_timeout() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold sport->port.lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need sport->port.lock in position (2) of thread 2. As a result, sa1100_set_termios() will block forever. This patch moves del_timer_sync() before spin_lock_irqsave() in order to prevent the deadlock.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop() There is a deadlock in ieee80211_beacons_stop(), which is shown below: (Thread 1) | (Thread 2) | ieee80211_send_beacon() ieee80211_beacons_stop() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | ieee80211_send_beacon_cb() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need ieee->beacon_lock in position (2) of thread 2. As a result, ieee80211_beacons_stop() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] <TASK> [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt] Fix this by checking whether the 'info->netdev' is a null pointer first.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback() There is a deadlock in rtw_surveydone_event_callback(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_surveydone_event_callback()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | rtw_scan_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_surveydone_event_callback() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() in rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise, spin_lock_bh() will also cause deadlock() in timer handler.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26
In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle() There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_joinbss_event_prehandle()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | _rtw_join_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_joinbss_event_prehandle() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() to spin_lock_irq() in _rtw_join_timeout_handler() in order to prevent deadlock.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-02-26


Contact Us

Shodan ® - All rights reserved