An Improper Input Validation vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker to cause a PFE crash and thereby a Denial of Service (DoS). An FPC will crash and reboot after receiving a specific transit IPv6 packet over MPLS. Continued receipt of this packet will create a sustained Denial of Service (DoS) condition. This issue does not affect systems configured for IPv4 only. This issue affects: Juniper Networks Junos OS All versions prior to 12.3R12-S21; 15.1 versions prior to 15.1R7-S10; 17.3 versions prior to 17.3R3-S12; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S3-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-S1-EVO, 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO.
A Missing Release of File Descriptor or Handle after Effective Lifetime vulnerability in plugable authentication module (PAM) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). It is possible that after the termination of a gRPC connection the respective/var/run/<pid>.env file is not getting deleted which if occurring repeatedly can cause inode exhaustion. Inode exhaustion can present itself in two different ways: 1. The following log message can be observed: host kernel: pid <pid> (<process>), uid <uid> inumber <number> on /.mount/var: out of inodes which by itself is a clear indication. 2. The following log message can be observed: host <process>[<pid>]: ... : No space left on device which is not deterministic and just a representation of a write error which could have several reasons. So the following check needs to be done: user@host> show system storage no-forwarding Filesystem Size Used Avail Capacity Mounted on /dev/ada1p1 475M 300M 137M 69% /.mount/var which indicates that the write error is not actually due to a lack of disk space. If either 1. or 2. has been confirmed, then the output of: user@host> file list /var/run/*.env | count need to be checked and if it indicates a high (>10000) number of files the system has been affected by this issue. This issue affects: Juniper Networks Junos OS All versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-EVO; 21.1 versions prior to 21.1R3-S1-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.
An Improper Handling of Unexpected Data Type vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). Continued execution of this command might cause a sustained Denial of Service condition. If BGP rib sharding is configured and a certain CLI command is executed the rpd process can crash. During the rpd crash and restart, the routing protocols might be impacted and traffic disruption might be seen due to the loss of routing information. This issue affects: Juniper Networks Junos OS 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved 20.4 versions prior to 20.4R3-EVO; 21.1 versions prior to 21.1R3-EVO; 21.2 versions prior to 21.2R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 20.3R1. Juniper Networks Junos OS Evolved versions prior to 20.3R1-EVO.
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packetIO daemon of Juniper Networks Junos OS Evolved on PTX10003, PTX10004, and PTX10008 allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). Continued receipt of these crafted packets will cause a sustained Denial of Service condition. This issue affects Juniper Networks Junos OS Evolved all versions prior to 20.4R2-S3-EVO on PTX10003, PTX10004, and PTX10008. This issue does not affect: Juniper Networks Junos OS Evolved versions 21.1R1-EVO and above; Juniper Networks Junos OS.
An Improper Update of Reference Count vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to trigger a counter overflow, eventually causing a Denial of Service (DoS). This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S1-EVO; 21.1 versions prior to 21.1R3-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO. This issue does not affect Juniper Networks Junos OS.
An Improper Check for Unusual or Exceptional Conditions vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker with an established ISIS adjacency to cause a Denial of Service (DoS). The rpd CPU spikes to 100% after a malformed ISIS TLV has been received which will lead to processing issues of routing updates and in turn traffic impact. This issue affects: Juniper Networks Junos OS 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R2-S6, 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S3-EVO; 21.2 versions prior to 21.2R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.
An Operation on a Resource after Expiration or Release vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker with an established BGP session to cause a Denial of Service (DoS). This issue occurs when proxy-generate route-target filtering is enabled, and certain proxy-route add and delete events are happening. This issue affects: Juniper Networks Junos OS All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S8, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO.
An Improper Access Control vulnerability in Juniper Networks Junos OS Evolved allows a network-based unauthenticated attacker who is able to connect to a specific open IPv4 port, which in affected releases should otherwise be unreachable, to cause the CPU to consume all resources as more traffic is sent to the port to create a Denial of Service (DoS) condition. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS Evolved 20.4 versions prior to 20.4R3-S2-EVO; 21.1 versions prior to 21.1R3-S1-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO; 21.4 versions prior to 21.4R2-EVO. This issue does not affect Junos OS.
An Improper Initialization vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker who sends specific packets in certain orders and at specific timings to force OSPFv3 to unexpectedly enter graceful-restart (GR helper mode) even though there is not any Grace-LSA received in OSPFv3 causing a Denial of Service (DoS). Unexpectedly entering GR helper mode might cause the OSPFv3 neighbor adjacency formed on this interface to be stuck in the "INIT" state which can be observed by issuing the following command: user@device> show ospf3 neighbor ID Interface State xx.xx.xx.xx ae100.0 Init <<<<<<<<<< An indicator of compromise can be seen in log files when traceoptions for OSPFv3 are enabled before the issue occurs. These logfile messages are as follows: OSPF restart signaling: Received hello with LR bit set from nbr ip=xx::xx id=xx.xx.xx.xx. Set oob-resync capabilty 1. OSPF Restart Signaling: Start helper mode for nbr ip xx::xx id xx.xx.xx.xx OSPF restart signaling: abort helper mode for nbr ip=xx::xx id=xx.xx.xx.xx OSPF neighbor xx::xx (realm ipv6-unicast <interface.unit> area xx.xx.xx.xx) state changed from Full to Init due to 1WayRcvd (event reason: neighbor is in one-way mode) (nbr helped: 0) This issue affects: Juniper Networks Junos OS. 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S4; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect any version of Juniper Networks Junos OS 12.3. This issue affects Juniper Networks Junos OS Evolved all versions prior to 21.2R2-EVO.
A Missing Release of Memory after Effective Lifetime vulnerability in the Layer-2 control protocols daemon (l2cpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a memory leak. Continued exploitation can lead to memory exhaustion and thereby a Denial of Service (DoS). This issue occurs when specific LLDP packets are received. The impact of the l2cpd cores is that if any of the stp protocols (rstp, mstp or vstp) is used then stp re-converges and traffic loss will occur during that time. Also if any services depend on LLDP state (like PoE or VoIP device recognition) then these will also be affected. The memory utilization of the L2CPd process can be monitored with the following command: user@host> show system processes extensive | match l2cpd 1234 root 52 0 521M 43412K RUN 1 4:02 34.47% l2cpd This issue affects: Juniper Networks Junos OS 18.4 version 18.4R2-S4 and later versions prior to 18.4R2-S10. 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R2; Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S2-EVO; 21.1 version 21.1R1-EVO and later versions; 21.2 versions prior to 21.2R2-EVO. This issue does not affect: Juniper Networks Junos OS 19.1 version 19.1R1 and later versions.