Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 4.19.80  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: serial: imx: Add missing .thaw_noirq hook The following warning is seen with non-console UART instance when system hibernates. [ 37.371969] ------------[ cut here ]------------ [ 37.376599] uart3_root_clk already disabled [ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0 ... [ 37.506986] Call trace: [ 37.509432] clk_core_disable+0xa4/0xb0 [ 37.513270] clk_disable+0x34/0x50 [ 37.516672] imx_uart_thaw+0x38/0x5c [ 37.520250] platform_pm_thaw+0x30/0x6c [ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4 [ 37.528972] device_resume+0x7c/0x160 [ 37.532633] dpm_resume+0xe8/0x230 [ 37.536036] hibernation_snapshot+0x288/0x430 [ 37.540397] hibernate+0x10c/0x2e0 [ 37.543798] state_store+0xc4/0xd0 [ 37.547203] kobj_attr_store+0x1c/0x30 [ 37.550953] sysfs_kf_write+0x48/0x60 [ 37.554619] kernfs_fop_write_iter+0x118/0x1ac [ 37.559063] new_sync_write+0xe8/0x184 [ 37.562812] vfs_write+0x230/0x290 [ 37.566214] ksys_write+0x68/0xf4 [ 37.569529] __arm64_sys_write+0x20/0x2c [ 37.573452] invoke_syscall.constprop.0+0x50/0xf0 [ 37.578156] do_el0_svc+0x11c/0x150 [ 37.581648] el0_svc+0x30/0x140 [ 37.584792] el0t_64_sync_handler+0xe8/0xf0 [ 37.588976] el0t_64_sync+0x1a0/0x1a4 [ 37.592639] ---[ end trace 56e22eec54676d75 ]--- On hibernating, pm core calls into related hooks in sequence like: .freeze .freeze_noirq .thaw_noirq .thaw With .thaw_noirq hook being absent, the clock will be disabled in a unbalanced call which results the warning above. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_thaw clk_disable_unprepare() Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have the call sequence corrected as below and thus fix the warning. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_resume_noirq() clk_enable() imx_uart_thaw clk_disable_unprepare()
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix use-after-free in snd_soc_exit() KASAN reports a use-after-free: BUG: KASAN: use-after-free in device_del+0xb5b/0xc60 Read of size 8 at addr ffff888008655050 by task rmmod/387 CPU: 2 PID: 387 Comm: rmmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl+0x79/0x9a print_report+0x17f/0x47b kasan_report+0xbb/0xf0 device_del+0xb5b/0xc60 platform_device_del.part.0+0x24/0x200 platform_device_unregister+0x2e/0x40 snd_soc_exit+0xa/0x22 [snd_soc_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail, but its ret is ignored, which makes soc_dummy_dev unregistered twice. snd_soc_init() snd_soc_util_init() platform_device_register_simple(soc_dummy_dev) platform_driver_register() # fail platform_device_unregister(soc_dummy_dev) platform_driver_register() # success ... snd_soc_exit() snd_soc_util_exit() # soc_dummy_dev will be unregistered for second time To fix it, handle error and stop snd_soc_init() when util_init() fail. Also clean debugfs when util_init() or driver_register() fail.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: ata: libata-transport: fix double ata_host_put() in ata_tport_add() In the error path in ata_tport_add(), when calling put_device(), ata_tport_release() is called, it will put the refcount of 'ap->host'. And then ata_host_put() is called again, the refcount is decreased to 0, ata_host_release() is called, all ports are freed and set to null. When unbinding the device after failure, ata_host_stop() is called to release the resources, it leads a null-ptr-deref(), because all the ports all freed and null. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ata_host_stop+0x3c/0x84 [libata] lr : release_nodes+0x64/0xd0 Call trace: ata_host_stop+0x3c/0x84 [libata] release_nodes+0x64/0xd0 devres_release_all+0xbc/0x1b0 device_unbind_cleanup+0x20/0x70 really_probe+0x158/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0xb4/0x220 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x40 bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __pci_register_driver+0x4c/0x60 ahci_pci_driver_init+0x30/0x1000 [ahci] Fix this by removing redundant ata_host_put() in the error path.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: don't delete error page from pagecache This change is very similar to the change that was made for shmem [1], and it solves the same problem but for HugeTLBFS instead. Currently, when poison is found in a HugeTLB page, the page is removed from the page cache. That means that attempting to map or read that hugepage in the future will result in a new hugepage being allocated instead of notifying the user that the page was poisoned. As [1] states, this is effectively memory corruption. The fix is to leave the page in the page cache. If the user attempts to use a poisoned HugeTLB page with a syscall, the syscall will fail with EIO, the same error code that shmem uses. For attempts to map the page, the thread will get a BUS_MCEERR_AR SIGBUS. [1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens")
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: drm/scheduler: fix fence ref counting We leaked dependency fences when processes were beeing killed. Additional to that grab a reference to the last scheduled fence.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: initialize device's zone info for seeding When performing seeding on a zoned filesystem it is necessary to initialize each zoned device's btrfs_zoned_device_info structure, otherwise mounting the filesystem will cause a NULL pointer dereference. This was uncovered by fstests' testcase btrfs/163.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map Here is the BUG report by KASAN about null pointer dereference: BUG: KASAN: null-ptr-deref in strcmp+0x2e/0x50 Read of size 1 at addr 0000000000000000 by task python3/2640 Call Trace: strcmp __of_find_property of_find_property pinctrl_dt_to_map kasprintf() would return NULL pointer when kmalloc() fail to allocate. So directly return ENOMEM, if kasprintf() return NULL pointer.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of ns_writer on remount If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time. In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below: Task1 Task2 -------------------------------- ------------------------------ nilfs_construct_segment nilfs_segctor_sync init_wait init_waitqueue_entry add_wait_queue schedule nilfs_remount (R/W remount case) nilfs_attach_log_writer nilfs_detach_log_writer nilfs_segctor_destroy kfree finish_wait _raw_spin_lock_irqsave __raw_spin_lock_irqsave do_raw_spin_lock debug_spin_lock_before <-- use-after-free While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1]. This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix potential memleak in 'add_widget_node' As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-01
In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible memory leak in mISDN_dsp_element_register() Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, use put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the kfree() is removed. list_del() is called in mISDN_dsp_dev_release(), so it need be initialized.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-01


Contact Us

Shodan ® - All rights reserved