In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix a potential NPD in cleanup_prefix_route()
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430df ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: refill RX buffers before XDP or skb use
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM.
In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: limit XDP frame size to the RX buffer
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet.
In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: sync RX data at the hardware packet offset
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: avoid leaking percpu counter pointers
The native and compat get-entries paths copy the fixed rule entry header
from the kernelized rule blob to userspace before overwriting the entry's
counter fields with a sanitized counter snapshot.
On SMP kernels, entry->counters.pcnt contains the percpu allocation
address used by x_tables rule counters. A caller can provide a userspace
buffer that faults during the initial fixed-header copy after pcnt has
been copied but before the later sanitized counter copy runs. The syscall
then returns -EFAULT while leaving the raw percpu pointer in userspace.
Copy only the fixed entry prefix before counters from the kernelized rule
blob, then copy the sanitized counter snapshot into the counter field.
Apply this ordering to the IPv4, IPv6, and ARP native and compat
get-entries implementations so a fault cannot expose the internal percpu
counter pointer.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: revalidate bridge ports
ebt_redirect_tg() dereferences br_port_get_rcu() return without a
NULL check, causing a kernel panic when the bridge port has been
removed between the original hook invocation and an NFQUEUE
reinject.
A mere NULL check isn't sufficient, however. As sashiko review
points out userspace can not only remove the port from the bridge,
it could also place the device in a different virtual device, e.g.
macvlan.
If this happens, we must drop the packet, there is no way for us to
reinject it into the bridge path.
Switch to _upper API, we don't need the bridge port structure.
Also, this fix keeps another bug intact:
Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER
too aggressive, which prevents certain logging features when queueing
in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old
CONFIG_BRIDGE_NETFILTER cruft is off.
Fixes tag is a common ancestor, this was always broken.
In the Linux kernel, the following vulnerability has been resolved:
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure that the candidate tunnel actually has
a wildcard address.
In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight.
In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds checks for firmware log indices
Add validation that read and write indices in the firmware log buffer
are within valid bounds (< data_size) before using them. If
out-of-bounds indices are encountered (from firmware), clamp them to
safe values instead of proceeding with invalid offsets.
This prevents potential out-of-bounds buffer access when firmware
supplies invalid log indices.