Linux: >> Linux Kernel >> 6.1.139 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Avoid WARN() for symlink errors
Using WARN() for showing the error of symlink creations don't give
more information than telling that something goes wrong, since the
usual code path is a lregister callback from each control element
creation. More badly, the use of WARN() rather confuses fuzzer as if
it were serious issues.
This patch downgrades the warning messages to use the normal dev_err()
instead of WARN(). For making it clearer, add the function name to
the prefix, too.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
net: Fix icmp host relookup triggering ip_rt_bug
arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is:
WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
<IRQ>
ip_send_skb+0x14/0x40
__icmp_send+0x42d/0x6a0
ipv4_link_failure+0xe2/0x1d0
arp_error_report+0x3c/0x50
neigh_invalidate+0x8d/0x100
neigh_timer_handler+0x2e1/0x330
call_timer_fn+0x21/0x120
__run_timer_base.part.0+0x1c9/0x270
run_timer_softirq+0x4c/0x80
handle_softirqs+0xac/0x280
irq_exit_rcu+0x62/0x80
sysvec_apic_timer_interrupt+0x77/0x90
The script below reproduces this scenario:
ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \
dir out priority 0 ptype main flag localok icmp
ip l a veth1 type veth
ip a a 192.168.141.111/24 dev veth0
ip l s veth0 up
ping 192.168.141.155 -c 1
icmp_route_lookup() create input routes for locally generated packets
while xfrm relookup ICMP traffic.Then it will set input route
(dst->out = ip_rt_bug) to skb for DESTUNREACH.
For ICMP err triggered by locally generated packets, dst->dev of output
route is loopback. Generally, xfrm relookup verification is not required
on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1).
Skip icmp relookup for locally generated packets to fix it.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
net/smc: initialize close_work early to avoid warning
We encountered a warning that close_work was canceled before
initialization.
WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0
Workqueue: events smc_lgr_terminate_work [smc]
RIP: 0010:__flush_work+0x19e/0x1b0
Call Trace:
? __wake_up_common+0x7a/0x190
? work_busy+0x80/0x80
__cancel_work_timer+0xe3/0x160
smc_close_cancel_work+0x1a/0x70 [smc]
smc_close_active_abort+0x207/0x360 [smc]
__smc_lgr_terminate.part.38+0xc8/0x180 [smc]
process_one_work+0x19e/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x117/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x22/0x30
This is because when smc_close_cancel_work is triggered, e.g. the RDMA
driver is rmmod and the LGR is terminated, the conn->close_work is
flushed before initialization, resulting in WARN_ON(!work->func).
__smc_lgr_terminate | smc_connect_{rdma|ism}
-------------------------------------------------------------
| smc_conn_create
| \- smc_lgr_register_conn
for conn in lgr->conns_all |
\- smc_conn_kill |
\- smc_close_active_abort |
\- smc_close_cancel_work |
\- cancel_work_sync |
\- __flush_work |
(close_work) |
| smc_close_init
| \- INIT_WORK(&close_work)
So fix this by initializing close_work before establishing the
connection.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Fix slab-use-after-free read in sg_release()
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup includes scheduling deferred work
via sg_remove_sfp_usercontext(), which ultimately frees sfp.
After kref_put(), sg_release() continues to unlock open_rel_lock and may
reference sfp or sdp. If sfp has already been freed, this results in a
slab-use-after-free error.
Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the
open_rel_lock mutex. This ensures:
- No references to sfp or sdp occur after the reference count is
decremented.
- Cleanup functions such as sg_remove_sfp() and
sg_remove_sfp_usercontext() can safely execute without impacting the
mutex handling in sg_release().
The fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures proper
sequencing of resource cleanup and mutex operations, eliminating the
risk of use-after-free errors in sg_release().
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create'
An issue was identified in the dcn21_link_encoder_create function where
an out-of-bounds access could occur when the hpd_source index was used
to reference the link_enc_hpd_regs array. This array has a fixed size
and the index was not being checked against the array's bounds before
accessing it.
This fix adds a conditional check to ensure that the hpd_source index is
within the valid range of the link_enc_hpd_regs array. If the index is
out of bounds, the function now returns NULL to prevent undefined
behavior.
References:
[ 65.920507] ------------[ cut here ]------------
[ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29
[ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]'
[ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13
[ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020
[ 65.920527] Call Trace:
[ 65.920529] <TASK>
[ 65.920532] dump_stack_lvl+0x48/0x70
[ 65.920541] dump_stack+0x10/0x20
[ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0
[ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu]
[ 65.921009] link_create+0x6d3/0xed0 [amdgpu]
[ 65.921355] create_links+0x18a/0x4e0 [amdgpu]
[ 65.921679] dc_create+0x360/0x720 [amdgpu]
[ 65.921999] ? dmi_matches+0xa0/0x220
[ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu]
[ 65.922342] ? console_unlock+0x77/0x120
[ 65.922348] ? dev_printk_emit+0x86/0xb0
[ 65.922354] dm_hw_init+0x15/0x40 [amdgpu]
[ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu]
[ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu]
[ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu]
[ 65.923087] local_pci_probe+0x4b/0xb0
[ 65.923087] pci_device_probe+0xc8/0x280
[ 65.923087] really_probe+0x187/0x300
[ 65.923087] __driver_probe_device+0x85/0x130
[ 65.923087] driver_probe_device+0x24/0x110
[ 65.923087] __driver_attach+0xac/0x1d0
[ 65.923087] ? __pfx___driver_attach+0x10/0x10
[ 65.923087] bus_for_each_dev+0x7d/0xd0
[ 65.923087] driver_attach+0x1e/0x30
[ 65.923087] bus_add_driver+0xf2/0x200
[ 65.923087] driver_register+0x64/0x130
[ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu]
[ 65.923087] __pci_register_driver+0x61/0x70
[ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu]
[ 65.923087] do_one_initcall+0x49/0x310
[ 65.923087] ? kmalloc_trace+0x136/0x360
[ 65.923087] do_init_module+0x6a/0x270
[ 65.923087] load_module+0x1fce/0x23a0
[ 65.923087] init_module_from_file+0x9c/0xe0
[ 65.923087] ? init_module_from_file+0x9c/0xe0
[ 65.923087] idempotent_init_module+0x179/0x230
[ 65.923087] __x64_sys_finit_module+0x5d/0xa0
[ 65.923087] do_syscall_64+0x76/0x120
[ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 65.923087] RIP: 0033:0x7f2d80f1e88d
[ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48
[ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d
[ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f
[ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002
[ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480
[ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0
[ 65.923087] </TASK>
[ 65.923927] ---[ end trace ]---
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM
We currently assume that there is at least one VMA in a MM, which isn't
true.
So we might end up having find_vma() return NULL, to then de-reference
NULL. So properly handle find_vma() returning NULL.
This fixes the report:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline]
RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194
Code: ...
RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000
RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044
RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1
R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003
R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8
FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709
__do_sys_migrate_pages mm/mempolicy.c:1727 [inline]
__se_sys_migrate_pages mm/mempolicy.c:1723 [inline]
__x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[akpm@linux-foundation.org: add unlikely()]
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: avoid NULL pointer error during sdio remove
When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio
workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON
is set to yes, kernel panic will happen:
Call trace:
destroy_workqueue+0x1c/0x258
ath10k_sdio_remove+0x84/0x94
sdio_bus_remove+0x50/0x16c
device_release_driver_internal+0x188/0x25c
device_driver_detach+0x20/0x2c
This is because during 'rmmod ath10k', ath10k_sdio_remove() will call
ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release()
will finally be called in ath10k_core_destroy(). This function will free
struct cfg80211_registered_device *rdev and all its members, including
wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio
workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON.
After device release, destroy_workqueue() will use NULL pointer then the
kernel panic happen.
Call trace:
ath10k_sdio_remove
->ath10k_core_unregister
……
->ath10k_core_stop
->ath10k_hif_stop
->ath10k_sdio_irq_disable
->ath10k_hif_power_down
->del_timer_sync(&ar_sdio->sleep_timer)
->ath10k_core_destroy
->ath10k_mac_destroy
->ieee80211_free_hw
->wiphy_free
……
->wiphy_dev_release
->destroy_workqueue
Need to call destroy_workqueue() before ath10k_core_destroy(), free
the work queue buffer first and then free pointer of work queue by
ath10k_core_destroy(). This order matches the error path order in
ath10k_sdio_probe().
No work will be queued on sdio workqueue between it is destroyed and
ath10k_core_destroy() is called. Based on the call_stack above, the
reason is:
Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and
ath10k_sdio_irq_disable() will queue work on sdio workqueue.
Sleep timer will be deleted before ath10k_core_destroy() in
ath10k_hif_power_down().
ath10k_sdio_irq_disable() only be called in ath10k_hif_stop().
ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif
bus, so ath10k_sdio_hif_tx_sg() won't be called anymore.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Create all dump files during debugfs initialization
For the current debugfs of hisi_sas, after user triggers dump, the
driver allocate memory space to save the register information and create
debugfs files to display the saved information. In this process, the
debugfs files created after each dump.
Therefore, when the dump is triggered while the driver is unbind, the
following hang occurs:
[67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[67840.862947] Mem abort info:
[67840.865855] ESR = 0x0000000096000004
[67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits
[67840.875125] SET = 0, FnV = 0
[67840.878291] EA = 0, S1PTW = 0
[67840.881545] FSC = 0x04: level 0 translation fault
[67840.886528] Data abort info:
[67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000
[67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000
[67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[67841.003628] pc : down_write+0x30/0x98
[67841.007546] lr : start_creating.part.0+0x60/0x198
[67841.012495] sp : ffff8000b979ba20
[67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40
[67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8
[67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18
[67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020
[67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff
[67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18
[67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18
[67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9
[67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001
[67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0
[67841.089759] Call trace:
[67841.092456] down_write+0x30/0x98
[67841.096017] start_creating.part.0+0x60/0x198
[67841.100613] debugfs_create_dir+0x48/0x1f8
[67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw]
[67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw]
[67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw]
[67841.125115] full_proxy_write+0x68/0xc8
[67841.129175] vfs_write+0xd8/0x3f0
[67841.132708] ksys_write+0x70/0x108
[67841.136317] __arm64_sys_write+0x24/0x38
[67841.140440] invoke_syscall+0x50/0x128
[67841.144385] el0_svc_common.constprop.0+0xc8/0xf0
[67841.149273] do_el0_svc+0x24/0x38
[67841.152773] el0_svc+0x38/0xd8
[67841.156009] el0t_64_sync_handler+0xc0/0xc8
[67841.160361] el0t_64_sync+0x1a4/0x1a8
[67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05)
[67841.170443] ---[ end trace 0000000000000000 ]---
To fix this issue, create all directories and files during debugfs
initialization. In this way, the driver only needs to allocate memory
space to save information each time the user triggers dumping.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Use disable_delayed_work_sync
This makes use of disable_delayed_work_sync instead
cancel_delayed_work_sync as it not only cancel the ongoing work but also
disables new submit which is disarable since the object holding the work
is about to be freed.
CVSS Score
5.5
EPSS Score
0.001
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
bpf: Call free_htab_elem() after htab_unlock_bucket()
For htab of maps, when the map is removed from the htab, it may hold the
last reference of the map. bpf_map_fd_put_ptr() will invoke
bpf_map_free_id() to free the id of the removed map element. However,
bpf_map_fd_put_ptr() is invoked while holding a bucket lock
(raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock
(spinlock_t), triggering the following lockdep warning:
=============================
[ BUG: Invalid wait context ]
6.11.0-rc4+ #49 Not tainted
-----------------------------
test_maps/4881 is trying to lock:
ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70
other info that might help us debug this:
context-{5:5}
2 locks held by test_maps/4881:
#0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270
#1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_map_update_elem+0x178/0xa80
stack backtrace:
CPU: 0 UID: 0 PID: 4881 Comm: test_maps Not tainted 6.11.0-rc4+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xb0
dump_stack+0x10/0x20
__lock_acquire+0x73e/0x36c0
lock_acquire+0x182/0x450
_raw_spin_lock_irqsave+0x43/0x70
bpf_map_free_id.part.0+0x21/0x70
bpf_map_put+0xcf/0x110
bpf_map_fd_put_ptr+0x9a/0xb0
free_htab_elem+0x69/0xe0
htab_map_update_elem+0x50f/0xa80
bpf_fd_htab_map_update_elem+0x131/0x270
htab_map_update_elem+0x50f/0xa80
bpf_fd_htab_map_update_elem+0x131/0x270
bpf_map_update_value+0x266/0x380
__sys_bpf+0x21bb/0x36b0
__x64_sys_bpf+0x45/0x60
x64_sys_call+0x1b2a/0x20d0
do_syscall_64+0x5d/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
One way to fix the lockdep warning is using raw_spinlock_t for
map_idr_lock as well. However, bpf_map_alloc_id() invokes
idr_alloc_cyclic() after acquiring map_idr_lock, it will trigger a
similar lockdep warning because the slab's lock (s->cpu_slab->lock) is
still a spinlock.
Instead of changing map_idr_lock's type, fix the issue by invoking
htab_put_fd_value() after htab_unlock_bucket(). However, only deferring
the invocation of htab_put_fd_value() is not enough, because the old map
pointers in htab of maps can not be saved during batched deletion.
Therefore, also defer the invocation of free_htab_elem(), so these
to-be-freed elements could be linked together similar to lru map.
There are four callers for ->map_fd_put_ptr:
(1) alloc_htab_elem() (through htab_put_fd_value())
It invokes ->map_fd_put_ptr() under a raw_spinlock_t. The invocation of
htab_put_fd_value() can not simply move after htab_unlock_bucket(),
because the old element has already been stashed in htab->extra_elems.
It may be reused immediately after htab_unlock_bucket() and the
invocation of htab_put_fd_value() after htab_unlock_bucket() may release
the newly-added element incorrectly. Therefore, saving the map pointer
of the old element for htab of maps before unlocking the bucket and
releasing the map_ptr after unlock. Beside the map pointer in the old
element, should do the same thing for the special fields in the old
element as well.
(2) free_htab_elem() (through htab_put_fd_value())
Its caller includes __htab_map_lookup_and_delete_elem(),
htab_map_delete_elem() and __htab_map_lookup_and_delete_batch().
For htab_map_delete_elem(), simply invoke free_htab_elem() after
htab_unlock_bucket(). For __htab_map_lookup_and_delete_batch(), just
like lru map, linking the to-be-freed element into node_to_free list
and invoking free_htab_elem() for these element after unlock. It is safe
to reuse batch_flink as the link for node_to_free, because these
elements have been removed from the hash llist.
Because htab of maps doesn't support lookup_and_delete operation,
__htab_map_lookup_and_delete_elem() doesn't have the problem, so kept
it as
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27