Linux: >> Linux Kernel >> 6.1.148 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix recursive semaphore deadlock in fiemap call
syzbot detected a OCFS2 hang due to a recursive semaphore on a
FS_IOC_FIEMAP of the extent list on a specially crafted mmap file.
context_switch kernel/sched/core.c:5357 [inline]
__schedule+0x1798/0x4cc0 kernel/sched/core.c:6961
__schedule_loop kernel/sched/core.c:7043 [inline]
schedule+0x165/0x360 kernel/sched/core.c:7058
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7115
rwsem_down_write_slowpath+0x872/0xfe0 kernel/locking/rwsem.c:1185
__down_write_common kernel/locking/rwsem.c:1317 [inline]
__down_write kernel/locking/rwsem.c:1326 [inline]
down_write+0x1ab/0x1f0 kernel/locking/rwsem.c:1591
ocfs2_page_mkwrite+0x2ff/0xc40 fs/ocfs2/mmap.c:142
do_page_mkwrite+0x14d/0x310 mm/memory.c:3361
wp_page_shared mm/memory.c:3762 [inline]
do_wp_page+0x268d/0x5800 mm/memory.c:3981
handle_pte_fault mm/memory.c:6068 [inline]
__handle_mm_fault+0x1033/0x5440 mm/memory.c:6195
handle_mm_fault+0x40a/0x8e0 mm/memory.c:6364
do_user_addr_fault+0x764/0x1390 arch/x86/mm/fault.c:1387
handle_page_fault arch/x86/mm/fault.c:1476 [inline]
exc_page_fault+0x76/0xf0 arch/x86/mm/fault.c:1532
asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623
RIP: 0010:copy_user_generic arch/x86/include/asm/uaccess_64.h:126 [inline]
RIP: 0010:raw_copy_to_user arch/x86/include/asm/uaccess_64.h:147 [inline]
RIP: 0010:_inline_copy_to_user include/linux/uaccess.h:197 [inline]
RIP: 0010:_copy_to_user+0x85/0xb0 lib/usercopy.c:26
Code: e8 00 bc f7 fc 4d 39 fc 72 3d 4d 39 ec 77 38 e8 91 b9 f7 fc 4c 89
f7 89 de e8 47 25 5b fd 0f 01 cb 4c 89 ff 48 89 d9 4c 89 f6 <f3> a4 0f
1f 00 48 89 cb 0f 01 ca 48 89 d8 5b 41 5c 41 5d 41 5e 41
RSP: 0018:ffffc9000403f950 EFLAGS: 00050256
RAX: ffffffff84c7f101 RBX: 0000000000000038 RCX: 0000000000000038
RDX: 0000000000000000 RSI: ffffc9000403f9e0 RDI: 0000200000000060
RBP: ffffc9000403fa90 R08: ffffc9000403fa17 R09: 1ffff92000807f42
R10: dffffc0000000000 R11: fffff52000807f43 R12: 0000200000000098
R13: 00007ffffffff000 R14: ffffc9000403f9e0 R15: 0000200000000060
copy_to_user include/linux/uaccess.h:225 [inline]
fiemap_fill_next_extent+0x1c0/0x390 fs/ioctl.c:145
ocfs2_fiemap+0x888/0xc90 fs/ocfs2/extent_map.c:806
ioctl_fiemap fs/ioctl.c:220 [inline]
do_vfs_ioctl+0x1173/0x1430 fs/ioctl.c:532
__do_sys_ioctl fs/ioctl.c:596 [inline]
__se_sys_ioctl+0x82/0x170 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f13850fd9
RSP: 002b:00007ffe3b3518b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f5f13850fd9
RDX: 0000200000000040 RSI: 00000000c020660b RDI: 0000000000000004
RBP: 6165627472616568 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe3b3518f0
R13: 00007ffe3b351b18 R14: 431bde82d7b634db R15: 00007f5f1389a03b
ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since
v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the
extent list of this running mmap executable. The user supplied buffer to
hold the fiemap information page faults calling ocfs2_page_mkwrite() which
will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same
semaphore. This recursive semaphore will hold filesystem locks and causes
a hang of the fileystem.
The ip_alloc_sem protects the inode extent list and size. Release the
read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap()
and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock
on the last extent but simplifies the error path.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()
Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can
cause various locking issues; see the following stack trace (edited for
style) as one example:
...
[10.011566] do_raw_spin_lock.cold
[10.011570] try_to_wake_up (5) double-acquiring the same
[10.011575] kick_pool rq_lock, causing a hardlockup
[10.011579] __queue_work
[10.011582] queue_work_on
[10.011585] kernfs_notify
[10.011589] cgroup_file_notify
[10.011593] try_charge_memcg (4) memcg accounting raises an
[10.011597] obj_cgroup_charge_pages MEMCG_MAX event
[10.011599] obj_cgroup_charge_account
[10.011600] __memcg_slab_post_alloc_hook
[10.011603] __kmalloc_node_noprof
...
[10.011611] bpf_map_kmalloc_node
[10.011612] __bpf_async_init
[10.011615] bpf_timer_init (3) BPF calls bpf_timer_init()
[10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable
[10.011619] bpf__sched_ext_ops_runnable
[10.011620] enqueue_task_scx (2) BPF runs with rq_lock held
[10.011622] enqueue_task
[10.011626] ttwu_do_activate
[10.011629] sched_ttwu_pending (1) grabs rq_lock
...
The above was reproduced on bpf-next (b338cf849ec8) by modifying
./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during
ops.runnable(), and hacking the memcg accounting code a bit to make
a bpf_timer_init() call more likely to raise an MEMCG_MAX event.
We have also run into other similar variants (both internally and on
bpf-next), including double-acquiring cgroup_file_kn_lock, the same
worker_pool::lock, etc.
As suggested by Shakeel, fix this by using __GFP_HIGH instead of
GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg()
raises an MEMCG_MAX event, we call __memcg_memory_event() with
@allow_spinning=false and avoid calling cgroup_file_notify() there.
Depends on mm patch
"memcg: skip cgroup_file_notify if spinning is not allowed":
https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/
v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/
https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/
v1 approach:
https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable()
The function of_phy_find_device may return NULL, so we need to take
care before dereferencing phy_dev.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: fix use-after-free in state_show()
state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock.
This allows a use-after-free race:
CPU 0 CPU 1
----- -----
state_show() damon_sysfs_turn_damon_on()
ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock);
damon_destroy_ctx(kdamond->damon_ctx);
kdamond->damon_ctx = NULL;
mutex_unlock(&damon_sysfs_lock);
damon_is_running(ctx); /* ctx is freed */
mutex_lock(&ctx->kdamond_lock); /* UAF */
(The race can also occur with damon_sysfs_kdamonds_rm_dirs() and
damon_sysfs_kdamond_release(), which free or replace the context under
damon_sysfs_lock.)
Fix by taking damon_sysfs_lock before dereferencing the context, mirroring
the locking used in pid_show().
The bug has existed since state_show() first accessed kdamond->damon_ctx.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
libceph: fix invalid accesses to ceph_connection_v1_info
There is a place where generic code in messenger.c is reading and
another place where it is writing to con->v1 union member without
checking that the union member is active (i.e. msgr1 is in use).
On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,
so such a read is almost guaranteed to return a bogus value instead of
0 when msgr2 is in use. This ends up being fairly benign because the
side effect is just the invalidation of the authorizer and successive
fetching of new tickets.
con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that
it's being written to can cause more serious consequences, but luckily
it's not something that happens often.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
kernfs: Fix UAF in polling when open file is released
A use-after-free (UAF) vulnerability was identified in the PSI (Pressure
Stall Information) monitoring mechanism:
BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140
Read of size 8 at addr ffff3de3d50bd308 by task systemd/1
psi_trigger_poll+0x3c/0x140
cgroup_pressure_poll+0x70/0xa0
cgroup_file_poll+0x8c/0x100
kernfs_fop_poll+0x11c/0x1c0
ep_item_poll.isra.0+0x188/0x2c0
Allocated by task 1:
cgroup_file_open+0x88/0x388
kernfs_fop_open+0x73c/0xaf0
do_dentry_open+0x5fc/0x1200
vfs_open+0xa0/0x3f0
do_open+0x7e8/0xd08
path_openat+0x2fc/0x6b0
do_filp_open+0x174/0x368
Freed by task 8462:
cgroup_file_release+0x130/0x1f8
kernfs_drain_open_files+0x17c/0x440
kernfs_drain+0x2dc/0x360
kernfs_show+0x1b8/0x288
cgroup_file_show+0x150/0x268
cgroup_pressure_write+0x1dc/0x340
cgroup_file_write+0x274/0x548
Reproduction Steps:
1. Open test/cpu.pressure and establish epoll monitoring
2. Disable monitoring: echo 0 > test/cgroup.pressure
3. Re-enable monitoring: echo 1 > test/cgroup.pressure
The race condition occurs because:
1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it:
- Releases PSI triggers via cgroup_file_release()
- Frees of->priv through kernfs_drain_open_files()
2. While epoll still holds reference to the file and continues polling
3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv
epolling disable/enable cgroup.pressure
fd=open(cpu.pressure)
while(1)
...
epoll_wait
kernfs_fop_poll
kernfs_get_active = true echo 0 > cgroup.pressure
... cgroup_file_show
kernfs_show
// inactive kn
kernfs_drain_open_files
cft->release(of);
kfree(ctx);
...
kernfs_get_active = false
echo 1 > cgroup.pressure
kernfs_show
kernfs_activate_one(kn);
kernfs_fop_poll
kernfs_get_active = true
cgroup_file_poll
psi_trigger_poll
// UAF
...
end: close(fd)
To address this issue, introduce kernfs_get_active_of() for kernfs open
files to obtain active references. This function will fail if the open file
has been released. Replace kernfs_get_active() with kernfs_get_active_of()
to prevent further operations on released file descriptors.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: edma: Fix memory allocation size for queue_priority_map
Fix a critical memory allocation bug in edma_setup_from_hw() where
queue_priority_map was allocated with insufficient memory. The code
declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8),
but allocated memory using sizeof(s8) instead of the correct size.
This caused out-of-bounds memory writes when accessing:
queue_priority_map[i][0] = i;
queue_priority_map[i][1] = i;
The bug manifested as kernel crashes with "Oops - undefined instruction"
on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the
memory corruption triggered kernel hardening features on Clang.
Change the allocation to use sizeof(*queue_priority_map) which
automatically gets the correct size for the 2D array structure.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix double free in idxd_setup_wqs()
The clean up in idxd_setup_wqs() has had a couple bugs because the error
handling is a bit subtle. It's simpler to just re-write it in a cleaner
way. The issues here are:
1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when
"conf_dev" hasn't been initialized.
2) If kzalloc_node() fails then again "conf_dev" is invalid. It's
either uninitialized or it points to the "conf_dev" from the
previous iteration so it leads to a double free.
It's better to free partial loop iterations within the loop and then
the unwinding at the end can handle whole loop iterations. I also
renamed the labels to describe what the goto does and not where the goto
was located.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Remove improper idxd_free
The call to idxd_free() introduces a duplicate put_device() leading to a
reference count underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
Call Trace:
<TASK>
idxd_remove+0xe4/0x120 [idxd]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x197/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
idxd_exit_module+0x34/0x7a0 [idxd]
__do_sys_delete_module.constprop.0+0x183/0x280
do_syscall_64+0x54/0xd70
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The idxd_unregister_devices() which is invoked at the very beginning of
idxd_remove(), already takes care of the necessary put_device() through the
following call path:
idxd_unregister_devices() -> device_unregister() -> put_device()
In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may
trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is
called immediately after, it can result in a use-after-free.
Remove the improper idxd_free() to avoid both the refcount underflow and
potential memory corruption during module unload.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-23
In the Linux kernel, the following vulnerability has been resolved:
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can_put_echo_skb() takes ownership of the SKB and it may be freed
during or after the call.
However, xilinx_can xcan_write_frame() keeps using SKB after the call.
Fix that by only calling can_put_echo_skb() after the code is done
touching the SKB.
The tx_lock is held for the entire xcan_write_frame() execution and
also on the can_get_echo_skb() side so the order of operations does not
matter.
An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skb
memory") did not move the can_put_echo_skb() call far enough.
[mkl: add "commit" in front of sha1 in patch description]
[mkl: fix indention]
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-23