Security Vulnerabilities - CVEs Published In October 2024
In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix memfd_pin_folios alloc race panic
If memfd_pin_folios tries to create a hugetlb page, but someone else
already did, then folio gets the value -EEXIST here:
folio = memfd_alloc_folio(memfd, start_idx);
if (IS_ERR(folio)) {
ret = PTR_ERR(folio);
if (ret != -EEXIST)
goto err;
then on the next trip through the "while start_idx" loop we panic here:
if (folio) {
folio_put(folio);
To fix, set the folio to NULL on error.
CVSS Score
4.7
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: fix filemap_get_folios_contig THP panic
Patch series "memfd-pin huge page fixes".
Fix multiple bugs that occur when using memfd_pin_folios with hugetlb
pages and THP. The hugetlb bugs only bite when the page is not yet
faulted in when memfd_pin_folios is called. The THP bug bites when the
starting offset passed to memfd_pin_folios is not huge page aligned. See
the commit messages for details.
This patch (of 5):
memfd_pin_folios on memory backed by THP panics if the requested start
offset is not huge page aligned:
BUG: kernel NULL pointer dereference, address: 0000000000000036
RIP: 0010:filemap_get_folios_contig+0xdf/0x290
RSP: 0018:ffffc9002092fbe8 EFLAGS: 00010202
RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000002
The fault occurs here, because xas_load returns a folio with value 2:
filemap_get_folios_contig()
for (folio = xas_load(&xas); folio && xas.xa_index <= end;
folio = xas_next(&xas)) {
...
if (!folio_try_get(folio)) <-- BOOM
"2" is an xarray sibling entry. We get it because memfd_pin_folios does
not round the indices passed to filemap_get_folios_contig to huge page
boundaries for THP, so we load from the middle of a huge page range see a
sibling. (It does round for hugetlbfs, at the is_file_hugepages test).
To fix, if the folio is a sibling, then return the next index as the
starting point for the next call to filemap_get_folios_contig.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
In the svc_i3c_master_probe function, &master->hj_work is bound with
svc_i3c_master_hj_work, &master->ibi_work is bound with
svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the
hj_work, svc_i3c_master_irq_handler can start the ibi_work.
If we remove the module which will call svc_i3c_master_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:
CPU0 CPU1
| svc_i3c_master_hj_work
svc_i3c_master_remove |
i3c_master_unregister(&master->base)|
device_unregister(&master->dev) |
device_release |
//free master->base |
| i3c_master_do_daa(&master->base)
| //use master->base
Fix it by ensuring that the work is canceled before proceeding with the
cleanup in svc_i3c_master_remove.
CVSS Score
7.0
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
vhost/scsi: null-ptr-dereference in vhost_scsi_get_req()
Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code
from control queue handler") a null pointer dereference bug can be
triggered when guest sends an SCSI AN request.
In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with
`&v_req.tmf.lun[1]` within a switch-case block and is then passed to
vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for
a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is
set to NULL in this branch. Later, in vhost_scsi_get_req(),
`vc->target` is dereferenced without being checked, leading to a null
pointer dereference bug. This bug can be triggered from guest.
When this bug occurs, the vhost_worker process is killed while holding
`vq->mutex` and the corresponding tpg will remain occupied
indefinitely.
Below is the KASAN report:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS
1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vhost_scsi_get_req+0x165/0x3a0
Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6
04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00
RSP: 0018:ffff888017affb50 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8
RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000
FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0
Call Trace:
<TASK>
? show_regs+0x86/0xa0
? die_addr+0x4b/0xd0
? exc_general_protection+0x163/0x260
? asm_exc_general_protection+0x27/0x30
? vhost_scsi_get_req+0x165/0x3a0
vhost_scsi_ctl_handle_vq+0x2a4/0xca0
? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10
? __switch_to+0x721/0xeb0
? __schedule+0xda5/0x5710
? __kasan_check_write+0x14/0x30
? _raw_spin_lock+0x82/0xf0
vhost_scsi_ctl_handle_kick+0x52/0x90
vhost_run_work_list+0x134/0x1b0
vhost_task_fn+0x121/0x350
...
</TASK>
---[ end trace 0000000000000000 ]---
Let's add a check in vhost_scsi_get_req.
[whitespace fixes]
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix a race between socket set up and I/O thread creation
In rxrpc_open_socket(), it sets up the socket and then sets up the I/O
thread that will handle it. This is a problem, however, as there's a gap
between the two phases in which a packet may come into rxrpc_encap_rcv()
from the UDP packet but we oops when trying to wake the not-yet created I/O
thread.
As a quick fix, just make rxrpc_encap_rcv() discard the packet if there's
no I/O thread yet.
A better, but more intrusive fix would perhaps be to rearrange things such
that the socket creation is done by the I/O thread.
CVSS Score
4.7
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: move xa_alloc to prevent UAF
Evil user can guess the next id of the vm before the ioctl completes and
then call vm destroy ioctl to trigger UAF since create ioctl is still
referencing the same vm. Move the xa_alloc all the way to the end to
prevent this.
v2:
- Rebase
(cherry picked from commit dcfd3971327f3ee92765154baebbaece833d3ca9)
CVSS Score
7.8
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
tracing/timerlat: Fix a race during cpuhp processing
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline.
CVSS Score
4.7
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
btrfs: wait for fixup workers before stopping cleaner kthread during umount
During unmount, at close_ctree(), we have the following steps in this order:
1) Park the cleaner kthread - this doesn't destroy the kthread, it basically
halts its execution (wake ups against it work but do nothing);
2) We stop the cleaner kthread - this results in freeing the respective
struct task_struct;
3) We call btrfs_stop_all_workers() which waits for any jobs running in all
the work queues and then free the work queues.
Syzbot reported a case where a fixup worker resulted in a crash when doing
a delayed iput on its inode while attempting to wake up the cleaner at
btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread
was already freed. This can happen during unmount because we don't wait
for any fixup workers still running before we call kthread_stop() against
the cleaner kthread, which stops and free all its resources.
Fix this by waiting for any fixup workers at close_ctree() before we call
kthread_stop() against the cleaner and run pending delayed iputs.
The stack traces reported by syzbot were the following:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065
Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-fixup btrfs_work_helper
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
__lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154
btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842
btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 2:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:319 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345
kasan_slab_alloc include/linux/kasan.h:247 [inline]
slab_post_alloc_hook mm/slub.c:4086 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187
alloc_task_struct_node kernel/fork.c:180 [inline]
dup_task_struct+0x57/0x8c0 kernel/fork.c:1107
copy_process+0x5d1/0x3d50 kernel/fork.c:2206
kernel_clone+0x223/0x880 kernel/fork.c:2787
kernel_thread+0x1bc/0x240 kernel/fork.c:2849
create_kthread kernel/kthread.c:412 [inline]
kthreadd+0x60d/0x810 kernel/kthread.c:765
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Freed by task 61:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:230 [inline]
slab_free_h
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix a NULL pointer dereference when failed to start a new trasacntion
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
<TASK>
commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496
btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430
del_balance_item fs/btrfs/volumes.c:3678 [inline]
reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742
btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
The allocation failure happens at the start_transaction() inside
prepare_to_relocate(), and during the error handling we call
unset_reloc_control(), which makes fs_info->balance_ctl to be NULL.
Then we continue the error path cleanup in btrfs_balance() by calling
reset_balance_state() which will call del_balance_item() to fully delete
the balance item in the root tree.
However during the small window between set_reloc_contrl() and
unset_reloc_control(), we can have a subvolume tree update and created a
reloc_root for that subvolume.
Then we go into the final btrfs_commit_transaction() of
del_balance_item(), and into btrfs_update_reloc_root() inside
commit_fs_roots().
That function checks if fs_info->reloc_ctl is in the merge_reloc_tree
stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer
dereference.
[FIX]
Just add extra check on fs_info->reloc_ctl inside
btrfs_update_reloc_root(), before checking
fs_info->reloc_ctl->merge_reloc_tree.
That DEAD_RELOC_TREE handling is to prevent further modification to the
reloc tree during merge stage, but since there is no reloc_ctl at all,
we do not need to bother that.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
A stored cross-site scripting (XSS) vulnerability in HikaShop Joomla Component < 5.1.1 allows remote attackers to execute arbitrary JavaScript in the web browser of a user, by including a malicious payload in the `description` parameter of any product. The `description `parameter is not sanitised in the backend.
CVSS Score
5.4
EPSS Score
0.001
Published
2024-10-21