Security Vulnerabilities
- CVEs Published In June 2025
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a data-race around bpf_jit_limit.
While reading bpf_jit_limit, it can be changed concurrently via sysctl,
WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit
is long, so we need to add a paired READ_ONCE() to avoid load-tearing.
In the Linux kernel, the following vulnerability has been resolved:
ieee802154/adf7242: defer destroy_workqueue call
There is a possible race condition (use-after-free) like below
(FREE) | (USE)
adf7242_remove | adf7242_channel
cancel_delayed_work_sync |
destroy_workqueue (1) | adf7242_cmd_rx
| mod_delayed_work (2)
|
The root cause for this race is that the upper layer (ieee802154) is
unaware of this detaching event and the function adf7242_channel can
be called without any checks.
To fix this, we can add a flag write at the beginning of adf7242_remove
and add flag check in adf7242_channel. Or we can just defer the
destructive operation like other commit 3e0588c291d6 ("hamradio: defer
ax25 kfree after unregister_netdev") which let the
ieee802154_unregister_hw() to handle the synchronization. This patch
takes the second option.
runs")
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: clear optc underflow before turn off odm clock
[Why]
After ODM clock off, optc underflow bit will be kept there always and clear not work.
We need to clear that before clock off.
[How]
Clear that if have when clock off.
In the Linux kernel, the following vulnerability has been resolved:
bpf, cgroup: Fix kernel BUG in purge_effective_progs
Syzkaller reported a triggered kernel BUG as follows:
------------[ cut here ]------------
kernel BUG at kernel/bpf/cgroup.c:925!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 194 Comm: detach Not tainted 5.19.0-14184-g69dac8e431af #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__cgroup_bpf_detach+0x1f2/0x2a0
Code: 00 e8 92 60 30 00 84 c0 75 d8 4c 89 e0 31 f6 85 f6 74 19 42 f6 84
28 48 05 00 00 02 75 0e 48 8b 80 c0 00 00 00 48 85 c0 75 e5 <0f> 0b 48
8b 0c5
RSP: 0018:ffffc9000055bdb0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888100ec0800 RCX: ffffc900000f1000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff888100ec4578
RBP: 0000000000000000 R08: ffff888100ec0800 R09: 0000000000000040
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100ec4000
R13: 000000000000000d R14: ffffc90000199000 R15: ffff888100effb00
FS: 00007f68213d2b80(0000) GS:ffff88813bc80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f74a0e5850 CR3: 0000000102836000 CR4: 00000000000006e0
Call Trace:
<TASK>
cgroup_bpf_prog_detach+0xcc/0x100
__sys_bpf+0x2273/0x2a00
__x64_sys_bpf+0x17/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f68214dbcb9
Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff8
RSP: 002b:00007ffeb487db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f68214dbcb9
RDX: 0000000000000090 RSI: 00007ffeb487db70 RDI: 0000000000000009
RBP: 0000000000000003 R08: 0000000000000012 R09: 0000000b00000003
R10: 00007ffeb487db70 R11: 0000000000000246 R12: 00007ffeb487dc20
R13: 0000000000000004 R14: 0000000000000001 R15: 000055f74a1011b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Repetition steps:
For the following cgroup tree,
root
|
cg1
|
cg2
1. attach prog2 to cg2, and then attach prog1 to cg1, both bpf progs
attach type is NONE or OVERRIDE.
2. write 1 to /proc/thread-self/fail-nth for failslab.
3. detach prog1 for cg1, and then kernel BUG occur.
Failslab injection will cause kmalloc fail and fall back to
purge_effective_progs. The problem is that cg2 have attached another prog,
so when go through cg2 layer, iteration will add pos to 1, and subsequent
operations will be skipped by the following condition, and cg will meet
NULL in the end.
`if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))`
The NULL cg means no link or prog match, this is as expected, and it's not
a bug. So here just skip the no match situation.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix a potential gpu_metrics_table memory leak
Memory is allocated for gpu_metrics_table in
smu_v13_0_4_init_smc_tables(), but not freed in
smu_v13_0_4_fini_smc_tables(). This may cause memory leaks, fix it.
In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix corrupted packets for XDP_SHARED_UMEM
Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where
packets are corrupted for the second and any further sockets bound to
the same umem. In other words, this does not affect the first socket
bound to the umem. The culprit for this bug is that the initialization
of the DMA addresses for the pre-populated xsk buffer pool entries was
not performed for any socket but the first one bound to the umem. Only
the linear array of DMA addresses was populated. Fix this by populating
the DMA addresses in the xsk buffer pool for every socket bound to the
same umem.
In the Linux kernel, the following vulnerability has been resolved:
skmsg: Fix wrong last sg check in sk_msg_recvmsg()
Fix one kernel NULL pointer dereference as below:
[ 224.462334] Call Trace:
[ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380
[ 224.462441] ? sock_has_perm+0x78/0xa0
[ 224.462463] tcp_bpf_recvmsg+0x12e/0x220
[ 224.462494] inet_recvmsg+0x5b/0xd0
[ 224.462534] __sys_recvfrom+0xc8/0x130
[ 224.462574] ? syscall_trace_enter+0x1df/0x2e0
[ 224.462606] ? __do_page_fault+0x2de/0x500
[ 224.462635] __x64_sys_recvfrom+0x24/0x30
[ 224.462660] do_syscall_64+0x5d/0x1d0
[ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca
In commit 9974d37ea75f ("skmsg: Fix invalid last sg check in
sk_msg_recvmsg()"), we change last sg check to sg_is_last(),
but in sockmap redirection case (without stream_parser/stream_verdict/
skb_verdict), we did not mark the end of the scatterlist. Check the
sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all
do not mark the end of sg. They are expected to use sg.end for end
judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.
In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: fix rumble worker null pointer deref
We can dereference a null pointer trying to queue work to a destroyed
workqueue.
If the device is disconnected, nintendo_hid_remove is called, in which
the rumble_queue is destroyed. Avoid using that queue to defer rumble
work once the controller state is set to JOYCON_CTLR_STATE_REMOVED.
This eliminates the null pointer dereference.
In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't redirect packets with invalid pkt_len
Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any
skbs, that is, the flow->head is null.
The root cause, as the [2] says, is because that bpf_prog_test_run_skb()
run a bpf prog which redirects empty skbs.
So we should determine whether the length of the packet modified by bpf
prog or others like bpf_prog_test is valid before forwarding it directly.
In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.