Security Vulnerabilities
- CVEs Published In May 2024
In the Linux kernel, the following vulnerability has been resolved:
can: j1939: fix Use-after-Free, hold skb ref while in use
This patch fixes a Use-after-Free found by the syzbot.
The problem is that a skb is taken from the per-session skb queue,
without incrementing the ref count. This leads to a Use-after-Free if
the skb is taken concurrently from the session queue due to a CTS.
In the Linux kernel, the following vulnerability has been resolved:
regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL
devm_gpiod_get_array_optional may return NULL if no GPIO was assigned.
In the Linux kernel, the following vulnerability has been resolved:
phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix
some resource leaks.
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: fix potential use-after-free in ec_bhf_remove
static void ec_bhf_remove(struct pci_dev *dev)
{
...
struct ec_bhf_priv *priv = netdev_priv(net_dev);
unregister_netdev(net_dev);
free_netdev(net_dev);
pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
...
}
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.
In the Linux kernel, the following vulnerability has been resolved:
net: cdc_eem: fix tx fixup skb leak
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.
fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.
In the Linux kernel, the following vulnerability has been resolved:
net: hamradio: fix memory leak in mkiss_close
My local syzbot instance hit memory leak in
mkiss_open()[1]. The problem was in missing
free_netdev() in mkiss_close().
In mkiss_open() netdevice is allocated and then
registered, but in mkiss_close() netdevice was
only unregistered, but not freed.
Fail log:
BUG: memory leak
unreferenced object 0xffff8880281ba000 (size 4096):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0.............
00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff8880141a9a00 (size 96):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(....
98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@..........
backtrace:
[<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310
[<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0
[<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0
[<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff8880219bfc00 (size 512):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............
80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff888029b2b200 (size 256):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: avoid a use-after-free when BO init fails
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm_bo_init() invokes the provided
destructor which should de-initialize and free the memory.
Thus, when nouveau_bo_init() returns an error the gem object has already
been released and the memory freed by nouveau_bo_del_ttm().
In the Linux kernel, the following vulnerability has been resolved:
mm/slub: actually fix freelist pointer vs redzoning
It turns out that SLUB redzoning ("slub_debug=Z") checks from
s->object_size rather than from s->inuse (which is normally bumped to
make room for the freelist pointer), so a cache created with an object
size less than 24 would have the freelist pointer written beyond
s->object_size, causing the redzone to be corrupted by the freelist
pointer. This was very visible with "slub_debug=ZF":
BUG test (Tainted: G B ): Right Redzone overwritten
-----------------------------------------------------------------------------
INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb
INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200
INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620
Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........
Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........
Redzone (____ptrval____): 40 1d e8 1a aa @....
Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........
Adjust the offset to stay within s->object_size.
(Note that no caches of in this size range are known to exist in the
kernel currently.)
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix vlan tunnel dst refcnt when egressing
The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.
[1] dmesg WARN_ON log and following refcnt errors
WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net
CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49
RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0
RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001
R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401
FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0
Call Trace:
br_handle_vlan+0xbc/0xca [bridge]
__br_forward+0x23/0x164 [bridge]
deliver_clone+0x41/0x48 [bridge]
br_handle_frame_finish+0x36f/0x3aa [bridge]
? skb_dst+0x2e/0x38 [bridge]
? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge]
? br_handle_frame_finish+0x3aa/0x3aa [bridge]
br_handle_frame+0x2c3/0x377 [bridge]
? __skb_pull+0x33/0x51
? vlan_do_receive+0x4f/0x36a
? br_handle_frame_finish+0x3aa/0x3aa [bridge]
__netif_receive_skb_core+0x539/0x7c6
? __list_del_entry_valid+0x16e/0x1c2
__netif_receive_skb_list_core+0x6d/0xd6
netif_receive_skb_list_internal+0x1d9/0x1fa
gro_normal_list+0x22/0x3e
dev_gro_receive+0x55b/0x600
? detach_buf_split+0x58/0x140
napi_gro_receive+0x94/0x12e
virtnet_poll+0x15d/0x315 [virtio_net]
__napi_poll+0x2c/0x1c9
net_rx_action+0xe6/0x1fb
__do_softirq+0x115/0x2d8
run_ksoftirqd+0x18/0x20
smpboot_thread_fn+0x183/0x19c
? smpboot_unregister_percpu_thread+0x66/0x66
kthread+0x10a/0x10f
? kthread_mod_delayed_work+0xb6/0xb6
ret_from_fork+0x22/0x30
---[ end trace 49f61b07f775fd2b ]---
dst_release: dst:00000000c02d677a refcnt:-1
dst_release underflow
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix vlan tunnel dst null pointer dereference
This patch fixes a tunnel_dst null pointer dereference due to lockless
access in the tunnel egress path. When deleting a vlan tunnel the
tunnel_dst pointer is set to NULL without waiting a grace period (i.e.
while it's still usable) and packets egressing are dereferencing it
without checking. Use READ/WRITE_ONCE to annotate the lockless use of
tunnel_id, use RCU for accessing tunnel_dst and make sure it is read
only once and checked in the egress path. The dst is already properly RCU
protected so we don't need to do anything fancy than to make sure
tunnel_id and tunnel_dst are read only once and checked in the egress path.