Security Vulnerabilities - CVEs Published In March 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Use correct version for UAC3 header validation
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: in-kernel: always mark signal+subflow endp as used
Syzkaller managed to find a combination of actions that was generating
this warning:
msk->pm.local_addr_used == 0
WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
Modules linked in:
CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
RSP: 0018:ffffc90001663880 EFLAGS: 00010293
RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff
R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640
R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650
FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:742
____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
___sys_sendmsg+0x2de/0x320 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f66346f826d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d
RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8
R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770
</TASK>
The actions that caused that seem to be:
- Set the MPTCP subflows limit to 0
- Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
- Create a new MPTCP connection from a different address: an ADD_ADDR
linked to the MPTCP endpoint will be sent ('signal' flag), but no
subflows is initiated ('subflow' flag)
- Remove the MPTCP endpoint
---truncated---
CVSS Score
5.5
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470
CVSS Score
5.5
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix preempt count leak in napi poll tracepoint
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio()
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag]
CVSS Score
7.1
EPSS Score
0.001
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-03-25