Security Vulnerabilities - CVEs Published In January 2025
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads8688: fix information leak in triggered buffer
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: rockchip_saradc: fix information leak in triggered buffer
The 'data' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: kmx61: fix information leak in triggered buffer
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390626] Call trace:
[ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[ 128.405468] xmit_one.constprop.0+0xc4/0x200
[ 128.410600] dev_hard_start_xmit+0x54/0xf0
[ 128.415556] sch_direct_xmit+0xe8/0x634
[ 128.420246] __dev_queue_xmit+0x224/0xc70
[ 128.425101] dev_queue_xmit+0x1c/0x40
[ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch]
[ 128.435409] do_output+0x60/0x17c [openvswitch]
[ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch]
[ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch]
[ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch]
[ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch]
[ 128.471460] xmit_one.constprop.0+0xc4/0x200
[ 128.476561] dev_hard_start_xmit+0x54/0xf0
[ 128.481489] __dev_queue_xmit+0x968/0xc70
[ 128.486330] dev_queue_xmit+0x1c/0x40
[ 128.490856] ip_finish_output2+0x250/0x570
[ 128.495810] __ip_finish_output+0x170/0x1e0
[ 128.500832] ip_finish_output+0x3c/0xf0
[ 128.505504] ip_output+0xbc/0x160
[ 128.509654] ip_send_skb+0x58/0xd4
[ 128.513892] udp_send_skb+0x12c/0x354
[ 128.518387] udp_sendmsg+0x7a8/0x9c0
[ 128.522793] inet_sendmsg+0x4c/0x8c
[ 128.527116] __sock_sendmsg+0x48/0x80
[ 128.531609] __sys_sendto+0x124/0x164
[ 128.536099] __arm64_sys_sendto+0x30/0x5c
[ 128.540935] invoke_syscall+0x50/0x130
[ 128.545508] el0_svc_common.constprop.0+0x10c/0x124
[ 128.551205] do_el0_svc+0x34/0xdc
[ 128.555347] el0_svc+0x20/0x30
[ 128.559227] el0_sync_handler+0xb8/0xc0
[ 128.563883] el0_sync+0x160/0x180
CVSS Score
5.5
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
CVSS Score
7.8
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
ipvlan: Fix use-after-free in ipvlan_get_iflink().
syzbot presented an use-after-free report [0] regarding ipvlan and
linkwatch.
ipvlan does not hold a refcnt of the lower device unlike vlan and
macvlan.
If the linkwatch work is triggered for the ipvlan dev, the lower dev
might have already been freed, resulting in UAF of ipvlan->phy_dev in
ipvlan_get_iflink().
We can delay the lower dev unregistration like vlan and macvlan by
holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and
releasing it in dev->priv_destructor().
Jakub pointed out calling .ndo_XXX after unregister_netdevice() has
returned is error prone and suggested [1] addressing this UAF in the
core by taking commit 750e51603395 ("net: avoid potential UAF in
default_operstate()") further.
Let's assume unregistering devices DOWN and use RCU protection in
default_operstate() not to race with the device unregistration.
[0]:
BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353
Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944
CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47
Hardware name: linux,dummy-virt (DT)
Workqueue: events_unbound linkwatch_event
Call trace:
show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x16c/0x6f0 mm/kasan/report.c:489
kasan_report+0xc0/0x120 mm/kasan/report.c:602
__asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380
ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353
dev_get_iflink+0x7c/0xd8 net/core/dev.c:674
default_operstate net/core/link_watch.c:45 [inline]
rfc2863_policy+0x144/0x360 net/core/link_watch.c:72
linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175
__linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239
linkwatch_event+0x64/0xa8 net/core/link_watch.c:282
process_one_work+0x700/0x1398 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391
kthread+0x2b0/0x360 kernel/kthread.c:389
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862
Allocated by task 9303:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x30/0x68 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4283 [inline]
__kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289
__kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650
alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209
rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595
rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771
__rtnl_newlink net/core/rtnetlink.c:3896 [inline]
rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011
rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901
netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
__sys_sendto+0x2ec/0x438 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__arm64_sys_sendto+0xe4/0x110 net/socket.c:2200
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151
el
---truncated---
CVSS Score
7.8
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The per-netns structure can be obtained from the table->data using
container_of(), then the 'net' one can be retrieved from the listen
socket (if available).
CVSS Score
5.5
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is
used.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-01-19
In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: udp_port: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-01-19